Released 2017 Reviewed: 26 October 2026

DJM-S3, field manual

Pioneer DJ DJM-S3 2-channel scratch mixer for Serato DJ Pro, top view

Booth briefing. The DJM-S3 is Pioneer's dedicated 2-channel scratch mixer for Serato DJ Pro, with a driver release dated 7 September 2017. Built for battle and scratch DJs rather than a club's long-form mixing, with its own SOUND COLOR FX and a MASTER OUT ATT. switch for taming hot signal chains. It needs a manufacturer driver on both macOS and Windows. A unit met today is almost always a scratch DJ's own rig or a studio piece, not a venue's house mixer.

Fast Lane

DJM-S3: equipment profile

A dedicated 2-channel scratch mixer for Serato DJ Pro, with a driver release dated 7 September 2017 placing it in that year's lineup alongside the DDJ-SB3's own generation. Built for battle and scratch DJs rather than a club's long-form mixing, with its own SOUND COLOR FX and a MASTER OUT ATT. switch for taming hot signal chains. A unit met today is almost always a scratch DJ's own rig or a studio piece, not a venue's house mixer.

Ports
Two channels of PHONO/LINE inputs on RCA, an AUX input on RCA, a MIC input on a 1/4" TS jack, MASTER OUT on both a balanced XLR pair (MASTER1) and RCA (MASTER2), headphone outputs on a 1/4" stereo jack and a 3.5 mm stereo mini jack, and a USB Type B port requiring a manufacturer driver on both macOS and Windows.
Dimensions and weight
23 cm wide, 31.9 deep, 10.8 tall (9.1 × 12.6 × 4.2 in). 3 kg / 6.6 lb.
Released
2017

The things that decide your gig

The DJM-S3 at a glance, each point linked to its section.

A MASTER OUT ATT. setting of -6 dB or -12 dB is a common, invisible cause of low or distorted sound.

This UTILITY setting attenuates the master output. If sound is too quiet, check it is not set low; if sound is distorted even with input levels correct, try setting it to -6 dB or -12 dB instead of 0 dB.

There is no sound or the volume is too low

The CROSS F. CURVE switch set to THRU disables the crossfader entirely.

With THRU selected, the crossfader does nothing, no matter how it's moved. This is the single named cause in the manual for 'cross fade does not work'.

Sound is distorted

It needs a manufacturer driver on both macOS and Windows, unlike the class-compliant DDJ-SB3.

If the mixer isn't recognised after connecting to a computer, the driver software has to be installed, or reinstalled if it's already present.

Cross fade does not work

It puts itself to sleep after 10 hours, and a sleeping unit looks like a dead one.

AUTO STANDBY ships ON. After 10 hours with no button or control touched and no audio arriving on any channel, the mixer enters standby and only the STANDBY indicator stays lit. Pressing FILTER cancels it. The setting can be turned off in UTILITY if the mixer lives in a studio that leaves it powered.

SOUND COLOR FX does not work

There are two master outputs at different levels, and picking the wrong one is a gain problem later.

MASTER1 is the balanced XLR pair, rated +25 dBu into 10 kilohms. MASTER2 is the RCA pair, rated +21 dBu. Both are attenuated together by MASTER OUT ATT. Run the XLRs into a house system and keep the RCAs for a booth monitor or a recorder.

This unit is not recognised after it has been connected to a computer

Official equipment video

Note: This feature requires an internet connection.

If something goes wrong

There is no sound or the volume is too low

Check the input selector switch is set to the proper position, connection cables are properly connected, terminals and plugs are clean, and MASTER OUT ATT. in UTILITY is not set to -6 dB when full level is wanted.

Sound is distorted

Adjust the MASTER LEVEL control so the master level indicator lights at around 0 dB at peak, set MASTER OUT ATT. in UTILITY to -6 dB or -12 dB, and adjust each channel's TRIM control so its level indicator peaks at about 0 dB.

Cross fade does not work

Check the CROSS F. CURVE selector switch; with THRU selected, the crossfader will not work. Set it to one of the actual curve positions instead.

SOUND COLOR FX does not work

The manual names one cause: the COLOR control is sitting at its centre position, where the effect does nothing. Turn it clockwise or counter-clockwise to hear it.

This unit is not recognised after it has been connected to a computer

Install the driver software, and if it is already installed, reinstall it. This mixer is not class compliant: it carries its own driver on both macOS and Windows, which is the opposite of the DDJ-SB3 of the same generation.

Sound of a computer cannot be output from this unit

Connect the mixer and the computer directly with the included USB cable, select the mixer in the computer's own audio output device settings, and set the channel's input selector switch to the USB position.

Sound is distorted when an analogue player is connected to the PHONO terminals, or the channel level indicator does not move when TRIM is turned

Both symptoms have the same cause: a line-level signal arriving at a phono input. If the turntable has a built-in phono equaliser, connect it to the LINE inputs instead, or set its own PHONO/LINE switch to PHONO. The same applies to a computer audio interface patched in between the deck and the mixer.

MIDI control does not work

The mixer's MIDI messages have to be assigned inside the software being controlled; the mixer does not map them for you. The MIDI channel, and whether buttons send TOGGLE or TRIGGER, are both set in UTILITY.

Features and connections

What goes in and what comes out

Media. Not applicable: a 2-channel scratch-style DJ mixer built for Serato DJ Pro, not a media player.

Connections. Two channels of PHONO/LINE inputs on RCA, an AUX input on RCA, a MIC input on a 1/4" TS jack, MASTER OUT on both a balanced XLR pair (MASTER1) and RCA (MASTER2), headphone outputs on a 1/4" stereo jack and a 3.5 mm stereo mini jack, and a USB Type B port requiring a manufacturer driver on both macOS and Windows.

Serato. Serato list the DJM-S3 as Serato DJ Pro enabled and Serato DVS enabled: connected to a computer, it unlocks Serato DJ Pro for free and opens Serato DVS for turntables or CDJs, with no licence to buy. Serato's DJM-S3 hardware page.

Firmware, drivers and manuals

Confirmed firmware, and what it fixed

Short answer. Pioneer DJ's own firmware download page lists Ver.1.01 (6 February 2018, an improvement to the MIC LEVEL control's volume curve) as the last one published; no later version is shown on the page.

No successor. No later model has been announced as a direct replacement for the DJM-S3.

Go to Pioneer DJ for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.

Pioneer DJ's DJM-S3 product page →

Windows buffer. On Windows the DJM-S3 Settings Utility has an ASIO tab for the buffer size. Pioneer DJ say to quit any application using the mixer as its audio device before changing it, and that a larger buffer makes breaks in the sound less likely while the latency increases.

Frequently asked questions

Quick answers

Is the DJM-S3 discontinued?
Pioneer DJ list it among their archived products, and no direct replacement has been announced.
What is the confirmed firmware?
Pioneer DJ's own firmware download page lists Ver.1.01 (6 February 2018, an improvement to the MIC LEVEL control's volume curve) as the last one published; no later version is shown on the page.
Does it need a driver?
Yes, on both macOS and Windows, unlike the class-compliant DDJ-SB3.
Why is there no sound or low volume?
Check the input selector switch is set to the proper position, connection cables are properly connected, terminals and plugs are clean, and MASTER OUT ATT. in UTILITY is not set to -6 dB when full level is wanted.
Why doesn't the cross fade work?
Check the CROSS F. CURVE selector switch; with THRU selected, the crossfader will not work. Set it to one of the actual curve positions instead.
What connections does it have?
Two channels of PHONO/LINE inputs on RCA, an AUX input on RCA, a MIC input on a 1/4" TS jack, MASTER OUT on both a balanced XLR pair (MASTER1) and RCA (MASTER2), headphone outputs on a 1/4" stereo jack and a 3.5 mm stereo mini jack, and a USB Type B port requiring a manufacturer driver on both macOS and Windows.
When was it released?
2017.

More legacy Pioneer DJ equipment: the full archive index.

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Pioneer DJ's archived DJM-S3 product page, their firmware download page (Ver.1.01, 6 February 2018), and the DJM-S3's own Operating Instructions manual (DRI1525A), checked 26 October 2026. Specifications theirs, priorities ours.