PIONEER DJ · ALPHATHETA FIRMWARE

What each firmware version fixed, deck by deck

Reviewed: 18 September 2026

Booth briefing. Read the firmware version off the unit, find it below, and you know which documented fixes it carries and which it does not yet. Every entry comes from the maker's own published change histories, 224 documented fixes across 61 models. On gear you control, sit at or above the version shown for it. On gear you do not control, this tells you what to plan around.

Finding the version on the unit

On a CDJ or DJM, the firmware version is in the utility menu, and on players it is also shown on the startup screen while the unit boots. Check it at soundcheck, not at doors. If a venue deck sits below the safe version, you cannot fix that in the booth, but you can stop it surprising you.

Players

CDJ-3000X

No updates yet

A young unit. AlphaTheta has published no defect fix for it, so there is nothing to report here. This section stays empty until a documented one exists.

Badge for this model

CDJ-3000X safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-3000x"><img src="https://www.savemygig.com/badge/firmware/cdj-3000x.svg" alt="CDJ-3000X firmware, Save My Gig"></a>

CDJ-3000

Clear at 3.20 or later , except 3.30 (withdrawn)
3.30 Withdrawn by Pioneer DJ. It added OneLibrary, then playlists failed to display for people exporting from older rekordbox. No music or data was deleted, and the player reverted to Device Library. Do not install this version. Official notice
Documented faults on the CDJ-3000, and the firmware version that fixed each one
Fixed in Area What was happening below that version
3.20 Link mid-set PRO DJ LINK connection with a DJM-2000NXS could fail.
3.19 Display mid-set Rare dead screen on power-on.
3.18 Audio mid-set Occasional no-audio, display blackouts and system freezes on some units.
3.14 Browse mid-set A "Waiting" popup could block the BROWSE screen entirely.
1.09 Playback mid-set Emergency Loop triggering wrongly during a Hot Cue pause.

Badge for this model

CDJ-3000 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-3000"><img src="https://www.savemygig.com/badge/firmware/cdj-3000.svg" alt="CDJ-3000 firmware, Save My Gig"></a>

CDJ-2000NXS2

Clear at 1.86 or later
Documented faults on the CDJ-2000NXS2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.86 Playback Minor bugs, with no detail published.
1.85 Playback mid-set Some Apple Lossless files would not play, and macOS Catalina 10.15 could not see the unit as an audio device.
1.84 Browse Inconsistencies in the matching function.
1.83 Link A connection fault with rekordbox on iOS.
1.82 Link A connection failure with TC Supply ShowKontrol software.
1.80 Audio mid-set A popping noise during a LOOP with QUANTIZE and MASTER TEMPO both enabled, and HOT CUE and other track information disappearing after using the SEARCH keyboard.
1.72 Playback mid-set Speed did not return to the displayed BPM with Sync enabled.
1.71 Browse mid-set SEARCH worked incorrectly under certain conditions.
1.70 Playback mid-set Emergency loop triggering on certain MP3 files carrying APE tag data.
1.60 Playback A startup issue affecting SLIP HOT CUE behaviour.
1.55 Display Waveform colour selection went missing, then was restored.
1.51 Audio mid-set Audio dropouts during Control Mode playback.
1.50 Browse mid-set Track load delays, a HOT LOOP changing length, and colour selection faults.
1.40 Link mid-set PRO DJ LINK worked incorrectly when used with a CDJ-TOUR1 and DJM-TOUR1, which is a touring rig rather than a standard booth.
1.40 Audio mid-set Digitally distorted white noise when playing certain .WAV files.
1.30 Browse TRACK FILTER worked incorrectly.

Badge for this model

CDJ-2000NXS2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-2000nxs2"><img src="https://www.savemygig.com/badge/firmware/cdj-2000nxs2.svg" alt="CDJ-2000NXS2 firmware, Save My Gig"></a>

CDJ-2000NXS

Clear at 1.43 or later
Documented faults on the CDJ-2000NXS, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.43 Playback mid-set Speed did not return to the displayed BPM with Sync on. Popping noise in a loop with QUANTIZE and MASTER TEMPO enabled.
1.41 Playback mid-set Issues during playback and track selection, and with SLIP HOT CUE.
1.40 Audio mid-set Digitally distorted white noise on certain WAV files. An active loop could activate a very short loop.
1.30 Link mid-set Linked to a CDJ-2000NXS, some CDJ-2000NXS2 features were disabled.
1.25 Playback mid-set AIFF at 24bit/48kHz stopped playing and could not be loaded to a deck. Audio noise while scratching.
1.24 USB mid-set Some hard drives were not recognised. Noise when Master Tempo was activated.
1.23 Playback mid-set A WAVE file with an incompatible header left "Loading.." on screen indefinitely. Folders did not list on a 2TB HDD.
1.21 Playback mid-set Needle Search pad faults, a sorted playlist not being restored on return, and the Master Player switching when an Active Loop started.
1.20 Display The loop beat display returned to WAVE after a loop ended, and SYNC MASTER switched itself when SYNC was disabled.
1.13 Browse mid-set The browse screen slowed or stopped after several hours of use, and a freeze occurred holding HOT CUE over a second during auto hot cue loading.
1.11 Browse mid-set A freeze could occur while editing the TAG LIST.
1.10 Audio mid-set Audio dropout on the slave deck when using SYNC.
1.06 Playback mid-set The player crashed on repeated HOT CUE presses with Master Tempo enabled.
1.04 Playback mid-set BPM could fluctuate during playback using Sync, and so could the tempo of a track with Slip Mode engaged.

Badge for this model

CDJ-2000NXS safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-2000nxs"><img src="https://www.savemygig.com/badge/firmware/cdj-2000nxs.svg" alt="CDJ-2000NXS firmware, Save My Gig"></a>

CDJ-1500X

Last published: 1.10

AlphaTheta publish one entry for this player, 1.10 of 2 July 2026, and it names no defect: it added compatibility with Serato DJ Pro and djay Pro, and closes with "Other minor bugs have been fixed." Below 1.10 neither of those applications will control the deck, which is the one thing the record does tell you.

Badge for this model

CDJ-1500X safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-1500x"><img src="https://www.savemygig.com/badge/firmware/cdj-1500x.svg" alt="CDJ-1500X firmware, Save My Gig"></a>

CDJ-900NXS

Clear at 1.31 or later
Documented faults on the CDJ-900NXS, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.31 Playback mid-set Speed did not return to the displayed BPM with Sync enabled.
1.30 Playback mid-set AIFF at 24bit/48kHz stopped playing and could not be loaded. Digitally distorted white noise on certain WAV files.
1.30 Link mid-set PRO DJ LINK compatibility with the CDJ-2000NXS2 and XDJ-1000MK2.
1.22 USB mid-set Some hard drives were not recognised. Noise when Master Tempo was activated.
1.21 Browse mid-set Folder browsing failed on 2TB hard drives. Slow track list browsing in Serato DJ HID mode.
1.20 Audio mid-set Playback sound stopped while BEAT DIVIDE was activated.

Badge for this model

CDJ-900NXS safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-900nxs"><img src="https://www.savemygig.com/badge/firmware/cdj-900nxs.svg" alt="CDJ-900NXS firmware, Save My Gig"></a>

XDJ-1000MK2

Clear at 1.42 or later
1.45 Not a defect. From this version the unit automatically switches off after 20 minutes of no use when Power Management is on, following the EU Ecodesign Directive. A deck that powered down during a long changeover is obeying that setting, not failing. Official notice
Documented faults on the XDJ-1000MK2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.42 Playback mid-set Some Apple Lossless files would not play.
1.42 Audio mid-set macOS Catalina 10.15 could not see the unit as an audio device.
1.41 Browse Inconsistencies in the matching function.
1.30 Audio mid-set Popping noise during a LOOP with QUANTIZE and MASTER TEMPO on.
1.30 Playback mid-set A HOT CUE fired after jumping to LOOP-IN when changing the loop beat length with QUANTIZE on.
1.23 Playback mid-set Speed did not return to the displayed BPM with Sync enabled.
1.22 Playback mid-set Emergency loop triggering on certain MP3 files carrying APE tag data.
1.20 Audio mid-set Audio dropouts during Control Mode playback.
1.20 Browse mid-set Track load time grew after several hours of use.
1.20 Playback Faults using SLIP HOT CUE.
1.10 Link mid-set Some tracks would not play on a linked CDJ-TOUR1.

Badge for this model

XDJ-1000MK2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-1000mk2"><img src="https://www.savemygig.com/badge/firmware/xdj-1000mk2.svg" alt="XDJ-1000MK2 firmware, Save My Gig"></a>

XDJ-700

Clear at 1.15 or later
1.14 Not a defect. From this version the unit automatically switches off after 20 minutes of no use when Power Management is on, following the EU Ecodesign Directive. A deck that powered down during a long changeover is obeying that setting, not failing. Official notice
Documented faults on the XDJ-700, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.15 Audio mid-set The USB audio function did not work in DJ Software Control mode.
1.13 Playback mid-set Speed did not return to the displayed BPM with Sync on. Popping noise in a loop with QUANTIZE and MASTER TEMPO enabled.
1.12 Browse mid-set SEARCH worked incorrectly under certain conditions.
1.11 Browse mid-set Categories and tracks were not shown in the browser when a database had many tracks. Search results did not appear when moving the cursor.

Badge for this model

XDJ-700 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-700"><img src="https://www.savemygig.com/badge/firmware/xdj-700.svg" alt="XDJ-700 firmware, Save My Gig"></a>

Mixers

DJM-V10

Clear at 1.16 or later
Documented faults on the DJM-V10, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.16 USB mid-set UASP-compatible USB drives not recognised.
1.12 Audio mid-set Potential audio cut-out when connected to CDJ-3000s over PRO DJ LINK.
1.07 MIDI Incorrect MIDI output under certain operation.
1.04 Audio mid-set Audio sometimes failing to input to a channel.

Badge for this model

DJM-V10 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-v10"><img src="https://www.savemygig.com/badge/firmware/djm-v10.svg" alt="DJM-V10 firmware, Save My Gig"></a>

DJM-V5

Last published: 1.13

AlphaTheta publish three entries for this mixer and none names a defect. 1.13 of 15 October 2026 added NFC-pairing support for SonicLink headphones. 1.10 of 25 June 2026 added support for djay Pro on Mac and Windows. 1.08 of 20 January 2026 added support for the RMX-IGNITE and closes with "Other minor bugs have been fixed." All three are capability gates: below them, those things do not work.

Badge for this model

DJM-V5 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-v5"><img src="https://www.savemygig.com/badge/firmware/djm-v5.svg" alt="DJM-V5 firmware, Save My Gig"></a>

DJM-V10-LF

Clear at 1.16 or later
Documented faults on the DJM-V10-LF, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.16 USB mid-set UASP-compatible USB drives not recognised.
1.12 Audio mid-set Potential audio cut-out when connected to CDJ-3000s over PRO DJ LINK.

Pioneer DJ publish a separate change history for the DJM-V10-LF, not shared with the DJM-V10 article, and it carries the same two documented fixes at the same version numbers, 1.16 and 1.12, which confirms the two mixers share electronics below the fader section. Its published history starts at 1.08, 27 Apr 2021; 1.11 and 1.14 are filed only as Minor issues with no symptom named, so neither earns a row here.

Badge for this model

DJM-V10-LF safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-v10-lf"><img src="https://www.savemygig.com/badge/firmware/djm-v10-lf.svg" alt="DJM-V10-LF firmware, Save My Gig"></a>

DJM-A9

Clear at 1.11 or later
Documented faults on the DJM-A9, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.11 Link mid-set Rare freeze under heavy PRO DJ LINK network load.
1.07 USB mid-set UASP-compatible USB drives not recognised.
1.02 Routing mid-set Insert method intermittently disabling itself when switching the Multi I/O input selector, and DVS phono input malfunction on USB-B after swapping computers across ports.

Badge for this model

DJM-A9 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-a9"><img src="https://www.savemygig.com/badge/firmware/djm-a9.svg" alt="DJM-A9 firmware, Save My Gig"></a>

DJM-A7

No updates yet

Announced 10 November 2026. AlphaTheta's launch note carries one firmware instruction for this mixer: update it to the firmware on their support page before using SonicLink Touch Pairing with the HDJ-F9.

Badge for this model

DJM-A7 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-a7"><img src="https://www.savemygig.com/badge/firmware/djm-a7.svg" alt="DJM-A7 firmware, Save My Gig"></a>

DJM-900NXS2

Clear at 2.08 or later
Documented faults on the DJM-900NXS2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
2.08 Audio Audio communication with iOS and iPadOS devices.
2.06 Recording DJM-REC recording or live streaming sometimes stopped.
2.05 Audio mid-set Incorrect audio in and out when connected to an iOS device, and the effect channel selector not working with it.
2.02 Audio mid-set Popping noise through USB audio when switching FX ASSIGN with BEAT FX on.
2.01 Audio mid-set Crossfader cut lag precision, a linked player display freezing during HID control, and a pop from the EQ or ISO knob with ISOLATOR selected.
2.00 Audio mid-set Incorrect audio output when changing Beat FX or the FX channel, a channel level indicator lit at power on, and switching noise on the USB output level.
1.20 Audio mid-set Clicking noise using the FILTER of SOUND COLOR FX, and a pop from DIGITAL MASTER OUT at power on.
1.10 Audio mid-set SOUND COLOR FX worked incorrectly, with flanger volume faults.
1.09 Audio mid-set Audio dropouts under certain conditions with DIGITAL selected.
1.07 Link mid-set PRO DJ LINK network faults, SOUND COLOR FX signal chain faults, and sampling rate switching noise.

Badge for this model

DJM-900NXS2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-900nxs2"><img src="https://www.savemygig.com/badge/firmware/djm-900nxs2.svg" alt="DJM-900NXS2 firmware, Save My Gig"></a>

DJM-900NXS

Clear at 1.32 or later
Documented faults on the DJM-900NXS, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.32 Power mid-set Standby could not always be cancelled with the LFO FORM (WAKE UP) control.
1.31 Audio mid-set Noise in USB audio in and out on some computers.
1.30 Audio mid-set Some effects did not work as expected when switched on.
1.28 Power mid-set The mixer shut itself down unexpectedly.
1.28 Display BPM display fluctuating when SLIP was used on a linked CDJ-2000NXS or CDJ-900.
1.26 Audio mid-set ROLL, REV ROLL and SLIP ROLL volume was not always stable.
1.26 Audio mid-set No effect sound when REV ROLL followed ROLL immediately.
1.26 Audio Slight noise while operating the X-PAD.

Badge for this model

DJM-900NXS safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-900nxs"><img src="https://www.savemygig.com/badge/firmware/djm-900nxs.svg" alt="DJM-900NXS firmware, Save My Gig"></a>

DJM-750MK2

Clear at 1.07 or later
1.06 Not a defect. From this version the unit automatically switches off after 20 minutes of no use when Power Management is on, following the EU Ecodesign Directive. A deck that powered down during a long changeover is obeying that setting, not failing. Official notice
Documented faults on the DJM-750MK2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.07 Audio Audio communication with iOS and iPadOS devices.
1.04 Recording DJM-REC recording or live streaming sometimes stopped.
1.03 Audio mid-set Popping noise through USB audio when switching FX ASSIGN with BEAT FX on.

Pioneer DJ published no detail for version 1.05 beyond "Minor issues", and versions 1.00 to 1.02 are not listed at all. What is above is every documented fix for this mixer, not necessarily every fix.

Badge for this model

DJM-750MK2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-750mk2"><img src="https://www.savemygig.com/badge/firmware/djm-750mk2.svg" alt="DJM-750MK2 firmware, Save My Gig"></a>

DJM-450

Clear at 1.08 or later
Documented faults on the DJM-450, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.08 iOS audio mid-set Pioneer DJ name the area and publish no symptom: "Fixed an issue related to audio communication with iOS/iPadOS devices."
1.06 Recording mid-set Recording or live streaming with DJM-REC sometimes stopped.
1.03 Audio mid-set Popping noise in USB audio over FX SEND/RETURN when switching FX assign in rekordbox.
1.02 Audio mid-set Popping noise from the EQ/ISO knob.

Badge for this model

DJM-450 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-450"><img src="https://www.savemygig.com/badge/firmware/djm-450.svg" alt="DJM-450 firmware, Save My Gig"></a>

DJM-250MK2

Clear at 1.07 or later
Documented faults on the DJM-250MK2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.07 DVS mid-set DVS timecode signals were occasionally not output when using TRAKTOR.
1.05 Audio mid-set Popping noise in USB audio over FX SEND/RETURN when switching FX assign in rekordbox with its Beat FX on. The effect is rekordbox's, not the mixer's: this model has no Beat FX of its own.

Badge for this model

DJM-250MK2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-250mk2"><img src="https://www.savemygig.com/badge/firmware/djm-250mk2.svg" alt="DJM-250MK2 firmware, Save My Gig"></a>

DJM-S11

Clear at 1.05 or later
Documented faults on the DJM-S11, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.05 Display In rare cases the waveform display disappeared when the input selector switch was changed while connected to a computer.
1.03 Display mid-set Unresponsive LCD display when 2 computers are connected.
1.03 Display Detailed waveform was displayed incorrectly when playing a short track.
1.02 Browse mid-set A mixer using emoji at the beginning of crate names, song names or artist names occasionally stopped working.
1.02 FX Unable to apply the REVERB and SMOOTH ECHO effects at the same time.

Badge for this model

DJM-S11 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-s11"><img src="https://www.savemygig.com/badge/firmware/djm-s11.svg" alt="DJM-S11 firmware, Save My Gig"></a>

DJM-S9

Clear at 1.09 or later
Documented faults on the DJM-S9, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.09 Link A firmware update error occurred on macOS Catalina.
1.08 Link A false "Please connect SeratoDJ" error was shown.
1.07 Display Performance pads did not illuminate correctly on Windows.
1.07 Audio mid-set Audio was cut at the start of the AUX input.
1.07 Audio The master mix out was recorded incorrectly on the USB-B computer when two computers were connected.

Nothing has been published since November 2019, which is a closed record rather than an open one.

Badge for this model

DJM-S9 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-s9"><img src="https://www.savemygig.com/badge/firmware/djm-s9.svg" alt="DJM-S9 firmware, Save My Gig"></a>

DJM-S7

Last published: 1.10

Pioneer DJ has published no defect fix for this mixer. The one release in the record, 1.10 of 18 July 2024, adds the EU Ecodesign automatic power-off at 20 minutes and renames the setting to Power Management, which is a behaviour change rather than a repair.

Badge for this model

DJM-S7 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-s7"><img src="https://www.savemygig.com/badge/firmware/djm-s7.svg" alt="DJM-S7 firmware, Save My Gig"></a>

DJM-S5

Clear at 1.03 or later
Documented faults on the DJM-S5, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.03 FX Scratch Cutter did not function correctly.

Version 1.03 is dated 31 May 2022, so it is effectively the only firmware most owners have ever seen and there has been no update since.

Badge for this model

DJM-S5 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-s5"><img src="https://www.savemygig.com/badge/firmware/djm-s5.svg" alt="DJM-S5 firmware, Save My Gig"></a>

Turntables

PLX-CRSS12

Last published: 1.10

The only published version is 1.10, an EU Ecodesign compliance change to the auto power-off timing, not a defect fix. No documented fault exists for this unit.

Badge for this model

PLX-CRSS12 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-plx-crss12"><img src="https://www.savemygig.com/badge/firmware/plx-crss12.svg" alt="PLX-CRSS12 firmware, Save My Gig"></a>

All-in-one systems

OPUS-QUAD

Clear at 1.32 or later
Documented faults on the OPUS-QUAD, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.32 Display Artwork sometimes was not displayed on the deck displays.
1.22 Audio mid-set No audio output, display screen blackouts and system freezes on some units.
1.12 USB mid-set Issues when using the exFAT file system, and internet connectivity problems.
1.10 Playback mid-set A filter settings issue, and M4A files not playing correctly.

Badge for this model

OPUS-QUAD safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-opus-quad"><img src="https://www.savemygig.com/badge/firmware/opus-quad.svg" alt="OPUS-QUAD firmware, Save My Gig"></a>

XDJ-XZ

Clear at 1.26 or later
Documented faults on the XDJ-XZ, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.26 Playback mid-set Faults when Master Tempo was turned on.
1.24 Audio mid-set Faults when using Beat FX.
1.23 Playback mid-set Sync was lost after scratching in Slip mode, and some WAV files would not play.
1.22 Link mid-set PRO DJ LINK did not work properly, with jog wheel and beat sync faults.
1.10 Audio mid-set No sound from the SEND output terminal.

Badge for this model

XDJ-XZ safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-xz"><img src="https://www.savemygig.com/badge/firmware/xdj-xz.svg" alt="XDJ-XZ firmware, Save My Gig"></a>

XDJ-RX3

Clear at 1.18 or later
Documented faults on the XDJ-RX3, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.18 Playback Issues when Master Tempo was turned on.
1.17 Browse Keyword search speed was slowing down.
1.15 Browse Occasionally the color of played tracks did not turn green if they were stored on an external device containing a large number of tracks.
1.13 USB mid-set Potential freeze when connecting two USB drives containing lots of tracks.
1.11 PRO DJ LINK Bugs when using PRO DJ LINK (Link Export).
1.10 Sound mid-set Sound stopped when SOFTWARE CONTROL was turned on.

Badge for this model

XDJ-RX3 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-rx3"><img src="https://www.savemygig.com/badge/firmware/xdj-rx3.svg" alt="XDJ-RX3 firmware, Save My Gig"></a>

XDJ-RX2

Clear at 1.43 or later
Documented faults on the XDJ-RX2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.43 Playback mid-set Some WAV files would not play on the unit.

Badge for this model

XDJ-RX2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-rx2"><img src="https://www.savemygig.com/badge/firmware/xdj-rx2.svg" alt="XDJ-RX2 firmware, Save My Gig"></a>

XDJ-RX

Clear at 2.21 or later
Documented faults on the XDJ-RX, and the firmware version that fixed each one
Fixed in Area What was happening below that version
2.21 Playback mid-set With SYNC enabled, certain MP3 files did not sync.
2.21 Display Waveforms were not shown for tracks imported to some USB hard drives.
2.21 FX mid-set Auto BPM failed with MASTER selected for the beat effect channel on LINE or PHONO.
2.20 Browse mid-set With some USB devices the rekordbox library was not shown on the browse screen.
1.80 Sound mid-set No audio was output when a track was loaded during SLIP LOOP.
1.70 USB mid-set Loading became unavailable once E-8306 had appeared.
1.70 Playback mid-set An unexpected EMERGENCY LOOP could start when loading a track from USB.
1.60 Display mid-set The unit froze when selecting a track with specific artwork.
1.60 Playback mid-set Audio skipped on specific VBR tracks.
1.50 Browse mid-set Loading tracks did not work properly.

Pioneer DJ publish ten dated versions for this unit, from 1.30 of 2 March 2015 to 2.21 of 26 October 2017, and nothing since. The table lists the verified defects; the linked change history is the complete record, and improvements and feature additions carry no row by rule.

Badge for this model

XDJ-RX safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-rx"><img src="https://www.savemygig.com/badge/firmware/xdj-rx.svg" alt="XDJ-RX firmware, Save My Gig"></a>

XDJ-RR

Clear at 1.05 or later
Documented faults on the XDJ-RR, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.05 Playback mid-set Some WAV files could not be played.
1.03 Playback mid-set Certain AIFF files did not play properly.
1.03 Playback mid-set Beat SYNC misbehaved when a CUE was triggered or a track was paused.
1.01 Browse mid-set The rekordbox database was missing on some HFS+ formatted USB devices.
1.01 Routing The HEADPHONES MONO SPLIT and STEREO setting was not saved across a power cycle.
1.01 Playback mid-set MASTER TEMPO did not work directly after scratching.

The highest published version is 1.08, dated 13 May 2025. The three 1.01 entries below all shipped in the same release of 23 April 2019.

Badge for this model

XDJ-RR safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-rr"><img src="https://www.savemygig.com/badge/firmware/xdj-rr.svg" alt="XDJ-RR firmware, Save My Gig"></a>

OMNIS-DUO

Clear at 1.10 or later
Documented faults on the OMNIS-DUO, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.10 Audio mid-set Issues when using Beat FX.
1.04 Browse Keys at the bottom of the touch keyboard occasionally became unresponsive.
1.03 Browse Played tracks were not displayed in the correct colour on the browse screen.
1.01 Audio mid-set Bluetooth audio input and output issues, and rekordbox recording problems in Performance mode.

Badge for this model

OMNIS-DUO safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-omnis-duo"><img src="https://www.savemygig.com/badge/firmware/omnis-duo.svg" alt="OMNIS-DUO firmware, Save My Gig"></a>

XDJ-AN

Clear at 1.20 or later
Documented faults on the XDJ-AN, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.20 Network Network updates would fail.
1.13 Crossfader mid-set The crossfader cut-lag width was not optimised, so cuts landed late.
1.10 Cloud Devices stayed logged in for the wrong duration when using QR code login.

Badge for this model

XDJ-AN safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-an"><img src="https://www.savemygig.com/badge/firmware/xdj-an.svg" alt="XDJ-AN firmware, Save My Gig"></a>

XDJ-AZ

Clear at 1.24 or later
Documented faults on the XDJ-AZ, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.24 Browse mid-set A "Library is not responding." error kept appearing.
1.05 Audio mid-set No audio output, display blackouts and system freezes on some units.
1.04 Recording Recording could not be stopped with the Rec button.

Badge for this model

XDJ-AZ safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-az"><img src="https://www.savemygig.com/badge/firmware/xdj-az.svg" alt="XDJ-AZ firmware, Save My Gig"></a>

DJ controllers

DDJ-FLX10

Clear at 1.12 or later
Documented faults on the DDJ-FLX10, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.12 STEMS mid-set Track Separation layout changes in rekordbox swapped the wrong part when adjusted by the EQ knob.

Badge for this model

DDJ-FLX10 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-flx10"><img src="https://www.savemygig.com/badge/firmware/ddj-flx10.svg" alt="DDJ-FLX10 firmware, Save My Gig"></a>

DDJ-FLX6

Clear at 1.12 or later
Documented faults on the DDJ-FLX6, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.12 Software An unspecified issue when using TRAKTOR PRO 3.

Pioneer DJ do publish a change history for this unit, filed under DDJ-FLX6-GT/DDJ-FLX6. It holds two entries. 1.11 of 15 November 2022 added support for TRAKTOR PRO 3 and VirtualDJ, which is an addition rather than a fix and carries no row above. Below that version the unit has no support for either application at all.

Badge for this model

DDJ-FLX6 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-flx6"><img src="https://www.savemygig.com/badge/firmware/ddj-flx6.svg" alt="DDJ-FLX6 firmware, Save My Gig"></a>

DDJ-1000

Clear at 1.12 or later
Documented faults on the DDJ-1000, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.12 Display mid-set The jog wheel waveform disappeared and the performance pads turned purple.
1.07 Audio A performance issue in Spiral FX.
1.07 Performance Fader Start accuracy issue.
1.06 Crossfader mid-set Crossfader position did not align correctly between the hardware and rekordbox dj.

Badge for this model

DDJ-1000 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-1000"><img src="https://www.savemygig.com/badge/firmware/ddj-1000.svg" alt="DDJ-1000 firmware, Save My Gig"></a>

DDJ-FLX4

Clear at 1.07 or later
Documented faults on the DDJ-FLX4, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.07 FX mid-set Beat FX turned off when the BEAT FX CH SELECT switch was used with Beat FX already on, under rekordbox for Mac and Windows.
1.06 Performance The knob centre-position adjustment in Utility mode could fail even when the knobs were centred.
1.04 USB mid-set The unit was not recognised when an iPhone 15 was connected by USB, and not recognised with a certain type of Android device.

Badge for this model

DDJ-FLX4 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-flx4"><img src="https://www.savemygig.com/badge/firmware/ddj-flx4.svg" alt="DDJ-FLX4 firmware, Save My Gig"></a>

DDJ-800

Clear at 1.02 or later
Documented faults on the DDJ-800, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.02 Display mid-set With MIDI-compatible software other than rekordbox, MIDI messages failed to update on the Jog Dial Displays.
1.02 Playback mid-set Fader Start accuracy was improved in the same release.
1.01 DVS mid-set rekordbox dvs could not be used with Control Vinyl.

Badge for this model

DDJ-800 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-800"><img src="https://www.savemygig.com/badge/firmware/ddj-800.svg" alt="DDJ-800 firmware, Save My Gig"></a>

DDJ-400

Last published: 1.03

Pioneer DJ publish two entries for this unit and neither names a defect. 1.03 of 9 March 2021 is described in full as "Minor issues" fixed, and 1.01 of 17 September 2019 is filed as an improvement, "Improved TEMPO slider stability." Nothing specific is listed here because nothing specific is published. A thin record is not the same thing as a clean one.

Badge for this model

DDJ-400 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-400"><img src="https://www.savemygig.com/badge/firmware/ddj-400.svg" alt="DDJ-400 firmware, Save My Gig"></a>

DDJ-REV7

Clear at 1.02 or later
Documented faults on the DDJ-REV7, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.02 Jog wheel mid-set A problem operating the motorised jog platter at high speed.

Badge for this model

DDJ-REV7 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-rev7"><img src="https://www.savemygig.com/badge/firmware/ddj-rev7.svg" alt="DDJ-REV7 firmware, Save My Gig"></a>

DDJ-REV5

Last published: 1.02

Pioneer DJ publish one version for this controller and it fixes nothing: Ver. 1.02 of 29 October 2024 changed the automatic power off time to 20 minutes to comply with the EU Ecodesign Directive, which is a compliance change and not a defect fix. No earlier change history could be found, so nothing is claimed about 1.00 or 1.01. An empty table here means nothing specific is published, and a thin record is not the same thing as a clean one.

Badge for this model

DDJ-REV5 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-rev5"><img src="https://www.savemygig.com/badge/firmware/ddj-rev5.svg" alt="DDJ-REV5 firmware, Save My Gig"></a>

DDJ-1000SRT

Clear at 1.02 or later
Documented faults on the DDJ-1000SRT, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.02 Display mid-set The BPM shown on the Beat FX display and the BPM in the Serato DJ Pro virtual deck did not match.
1.02 Audio mid-set Sampler sound did not reach the headphone output when the Sampler Cue button was pressed with the sampler volume at its lowest.

Ver. 1.05 of 9 March 2021 is the highest published version and its entire published note is that minor issues were fixed, so it carries no row. It does carry a documented consequence, printed by Pioneer DJ on the firmware article itself: after updating to 1.05 the Sampler Master Volume in Serato DJ Pro no longer syncs with the SAMPLER VOL knob, and the level has to be set in software instead. Version 1.02 had already changed that knob’s MIDI message. Versions 1.00, 1.01, 1.03 and 1.04 are implied by the numbering and do not appear in Pioneer DJ’s change history, which lists only 1.02 and 1.05, so nothing is claimed about them.

Badge for this model

DDJ-1000SRT safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-1000srt"><img src="https://www.savemygig.com/badge/firmware/ddj-1000srt.svg" alt="DDJ-1000SRT firmware, Save My Gig"></a>

DDJ-SX3

Clear at 1.02 or later
Documented faults on the DDJ-SX3, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.02 Playback mid-set The deck stopped playing after scratching or spinning the platter.
1.02 Display Performance pads and buttons sometimes lit incorrectly when connecting a computer with Serato DJ Pro running.

Ver. 1.02 of 06/Feb/2020 is the current and only published version. Pioneer DJ show its changes and no earlier change history could be found, so nothing is claimed about 1.00 or 1.01. Note that the firmware updater is separate software from the audio driver: the driver reaches macOS Tahoe and the updater’s own guide names nothing newer than macOS High Sierra and requires Java.

Badge for this model

DDJ-SX3 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-sx3"><img src="https://www.savemygig.com/badge/firmware/ddj-sx3.svg" alt="DDJ-SX3 firmware, Save My Gig"></a>

DDJ-SB3

Clear at 1.01 or later
Documented faults on the DDJ-SB3, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.01 FX mid-set FX FADE worked incorrectly when the unit was connected to Serato DJ Pro.
1.01 Display The LED lights lit incorrectly when Serato DJ Lite or Serato DJ Pro was launched or closed.

Badge for this model

DDJ-SB3 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-sb3"><img src="https://www.savemygig.com/badge/firmware/ddj-sb3.svg" alt="DDJ-SB3 firmware, Save My Gig"></a>

DDJ-GRV6

Last published: 1.02

Only one official firmware release is published, 1.02, which added Algoriddim djay support for Android. No documented defect fix exists yet. If it behaves strangely, the answer is almost never a missing update.

Badge for this model

DDJ-GRV6 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-grv6"><img src="https://www.savemygig.com/badge/firmware/ddj-grv6.svg" alt="DDJ-GRV6 firmware, Save My Gig"></a>

SLAB

Clear at 1.10 or later
Documented faults on the SLAB, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.10 Link Connection issue with Serato DJ Pro.
1.10 Link Connection issue with Serato Sample.
1.10 Performance Note Repeat malfunction.
1.10 Performance Touch strip malfunction.
1.10 Performance Encoder touch function malfunction.

Badge for this model

SLAB safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-slab"><img src="https://www.savemygig.com/badge/firmware/slab.svg" alt="SLAB firmware, Save My Gig"></a>

DJ effectors / samplers

DJS-1000

Clear at 1.12 or later
Documented faults on the DJS-1000, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.12 Display Minor issues on the touch display.
1.11 Audio mid-set Sample playback distorted when an external MIDI master clock was used in live sampling mode.
1.03 Performance mid-set The unit could freeze when manual live sampling was repeated with a beat length selected.

The published history holds six versions and three of them name a defect. The other three are additions and carry no row by the same rule every entry here follows: 1.10 extended the maximum sample length to 64 seconds and added project file loading, 1.20 raised the PRO DJ LINK ceiling to six units with CDJ-3000s and added Drum Machine mode, and 1.22 of 7 November 2024 changed the automatic shut off time to 20 minutes to comply with the EU Ecodesign Directive. Version 1.21 does not appear in the record. 1.20 is the version that matters most in a booth even though it fixed nothing.

Badge for this model

DJS-1000 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djs-1000"><img src="https://www.savemygig.com/badge/firmware/djs-1000.svg" alt="DJS-1000 firmware, Save My Gig"></a>

RMX-1000

Clear at 2.11 or later
Documented faults on the RMX-1000, and the firmware version that fixed each one
Fixed in Area What was happening below that version
2.11 Effects mid-set No sound would be output when ECHO was selected from SCENE FX, rarely.
2.10 Audio mid-set The output audio level was lowered in some conditions.
1.31 Effects mid-set The volume of SPIRAL UP and DOWN in SCENE FX became excessively loud, and QUANTIZE misbehaved when used with OVERDUB in X-PAD FX.
1.20 Audio mid-set Slight noise could rarely be heard on the output sound.
1.19 MIDI Sending and receiving MIDI signals with the plug-in was faulty.

Badge for this model

RMX-1000 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-rmx-1000"><img src="https://www.savemygig.com/badge/firmware/rmx-1000.svg" alt="RMX-1000 firmware, Save My Gig"></a>

RMX-500

Clear at 1.08 or later
Documented faults on the RMX-500, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.08 Audio mid-set Output level dropped when the unit was used as a USB audio interface.
1.08 USB The unit did not work as a plug-in controller on some computers.

Badge for this model

RMX-500 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-rmx-500"><img src="https://www.savemygig.com/badge/firmware/rmx-500.svg" alt="RMX-500 firmware, Save My Gig"></a>

RMX IGNITE

Clear at 1.04 or later
Documented faults on the RMX IGNITE, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.04 Audio Unwanted noise when using digital send/return with a USB cable.
1.04 Tempo mid-set BPM detection algorithm wrong when the measurement method was set to auto.
1.01 Link mid-set Issues when connected to mixers such as the DJM-A9 and DJM-V10.

Badge for this model

RMX IGNITE safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-rmx-ignite"><img src="https://www.savemygig.com/badge/firmware/rmx-ignite.svg" alt="RMX IGNITE firmware, Save My Gig"></a>

Production

CHORDCAT

Last published: 1.40

AlphaTheta publish firmware for this model as an additional information manual rather than as a change history. Their help centre page lists one for firmware 1.40 dated 12 March 2026, which describes what 1.10 through 1.40 added, among them user Chordsets, a Chord Edit mode, real-time recording of external MIDI and a MIDI Chord Trigger at 1.40. It names no defect fixed, so nothing is listed here as a fault. An empty table means nothing specific is published, which is not the same thing as a clean record.

Badge for this model

CHORDCAT safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-chordcat"><img src="https://www.savemygig.com/badge/firmware/chordcat.svg" alt="CHORDCAT firmware, Save My Gig"></a>

TORAIZ SP-16

Last published: 1.60

Pioneer DJ publish firmware for this model as an addendum rather than as a change history. Their help centre page lists a Firmware ver1.6 operating instructions addendum dated 6 February 2020, which describes what each version from 1.10 to 1.60 added, from PRO DJ LINK sync at 1.10 to a second insert effect and SYNC SOURCE SELECT at 1.60, plus a list of manual corrections dated 3 October 2019. It names no defect fixed in any version, so nothing is listed here as a fault. An empty table means nothing specific is published, which is not the same thing as a clean record.

Badge for this model

TORAIZ SP-16 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-toraiz-sp-16"><img src="https://www.savemygig.com/badge/firmware/toraiz-sp-16.svg" alt="TORAIZ SP-16 firmware, Save My Gig"></a>

TORAIZ SQUID

Last published: 1.10

Pioneer DJ publish firmware for this model as an addendum rather than as a change history. Their help centre page, which is current rather than archived, lists an addendum for firmware 1.10 dated 25 April 2019. It describes what 1.10 added, among them SQUID Manager, Program Change and Bank Select per track, a per-track delay and a per-pattern playback speed, and it names no defect fixed, so nothing is listed here as a fault. An empty table means nothing specific is published, which is not the same thing as a clean record.

Badge for this model

TORAIZ SQUID safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-toraiz-squid"><img src="https://www.savemygig.com/badge/firmware/toraiz-squid.svg" alt="TORAIZ SQUID firmware, Save My Gig"></a>

Classics

CDJ-900

Clear at 4.11 or later
Documented faults on the CDJ-900, and the firmware version that fixed each one
Fixed in Area What was happening below that version
4.11 USB mid-set A particular USB 3.0 device did not work properly.
4.11 Sound mid-set Static noise was occasionally generated with a particular MP3 file.
4.05 Playback mid-set The beat grid was rarely misaligned by about 50 ms with MASTER TEMPO on.
4.00 Playback mid-set Playback stopped if a loop was created across a whole CD.
3.20 USB mid-set A rare fault accessing media devices, and audio interruptions after long playback.

The last release for this player, 4.32 of 1 April 2014, added KUVO support and fixed nothing. Nothing has been published since. Only the entries that name a defect appear in the table above.

Badge for this model

CDJ-900 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-900"><img src="https://www.savemygig.com/badge/firmware/cdj-900.svg" alt="CDJ-900 firmware, Save My Gig"></a>

CDJ-2000

Clear at 4.33 or later
Documented faults on the CDJ-2000, and the firmware version that fixed each one
Fixed in Area What was happening below that version
4.33 Browse Tracks in some folders on a 2 TB hard drive were not displayed when browsing.
4.33 Playback mid-set A WAVE file with an incompatible header could not be loaded, and the loading message stayed on screen.
4.11 USB mid-set A particular USB 3.0 device did not work properly.
4.11 Sound mid-set Static noise was occasionally generated with a particular MP3 file.
4.10 Performance mid-set A fault could occur when multiple CUE or HOT CUE points were set at the same time.
4.05 Playback mid-set The beat grid was rarely misaligned by about 50 ms with MASTER TEMPO on.
4.04 PRO DJ LINK mid-set Playback stopped with an E-8302 PLAYER ERROR over PRO DJ LINK when reaching a hard drive that wakes slowly from sleep.
4.01 Playback mid-set Fader Start did not work correctly in some cases.
4.01 Browse Loading time when browsing from PLAYLIST had grown between 3.20 and 4.00.
4.00 Playback mid-set Playback stopped if a loop was created across a whole CD.
3.20 USB mid-set A rare fault accessing media devices, and audio interruptions after long playback.

Pioneer DJ publish a long record for this player, twelve dated versions from December 2009 to 4.33 in February 2015, and nothing since. Only the entries that name a defect appear in the table above; the feature releases and the sound-quality improvements are on the model page.

Badge for this model

CDJ-2000 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-cdj-2000"><img src="https://www.savemygig.com/badge/firmware/cdj-2000.svg" alt="CDJ-2000 firmware, Save My Gig"></a>

DDJ-RZX

Clear at 1.10 or later
Documented faults on the DDJ-RZX, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.10 Display mid-set Minor issues on the touch display.
1.09 Display mid-set Demo mode, the screen saver and the auto standby function activated during use.
1.05 Effects mid-set A clicking noise occurred when using the FILTER of SOUND COLOR FX.
1.04 Effects mid-set SOUND COLOR FX malfunctioned, and pad colours were wrong in SAMPLER mode.
1.04 MIDI mid-set The unit occasionally failed to receive MIDI signals.

Ver. 1.10 of 27 June 2019 is the highest published version. Ver. 1.08 improved tempo slider accuracy, which is an improvement rather than a named defect and carries no row. Versions 1.00 to 1.03, 1.06 and 1.07 are absent from the published change history and nothing is claimed about them. A version 1.11 is claimed by a third party and Pioneer DJ’s own page and change history both stop at 1.10, so it is not published here as fact. Firmware for this model ships as a Windows package only.

Badge for this model

DDJ-RZX safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-rzx"><img src="https://www.savemygig.com/badge/firmware/ddj-rzx.svg" alt="DDJ-RZX firmware, Save My Gig"></a>

DDJ-SX

Clear at 1.07 or later
Documented faults on the DDJ-SX, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.07 Jog wheel mid-set Jog platter sensitivity was wrong when the touch sensor level knob was set close to maximum.
1.05 Audio mid-set High microphone input levels produced distortion.
1.05 Performance Pad behaviour in sampler velocity mode was limited.
1.02 Playback mid-set Scratching was not possible with vinyl mode disabled and the audio stopped.
1.02 MIDI mid-set Generic MIDI control did not work correctly.
1.01 Jog wheel The touch sensor sensitivity adjustment range was too narrow.

Ver. 1.07 is the end of the record and Pioneer DJ say so themselves: if the unit reads 1.07 there is nothing to update. Two dates exist for it, 13 May 2013 in the change history document and 06/Feb/2020 on the article, and the 2013 date is the contemporaneous one. THE UPDATER NEEDS JAVA, which Pioneer DJ state in one line and which is the reason an update appears to do nothing on a machine with no Java runtime installed. After updating, the change history advises recalibrating the touch sensor levels.

Badge for this model

DDJ-SX safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-sx"><img src="https://www.savemygig.com/badge/firmware/ddj-sx.svg" alt="DDJ-SX firmware, Save My Gig"></a>

DDJ-SX2

Clear at 1.06 or later
Documented faults on the DDJ-SX2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.06 Channel fader mid-set Multiple channel faders worked incorrectly when used at the same time.

Pioneer DJ list only Ver. 1.06 and the change histories for everything before it have been taken offline: the Ver. 1.05 change history and the update guide now redirect to a generic page. Pioneer DJ date 1.06 06/Feb/2020 and Pioneer DJ’s own news item dates the same version and the same fix 30 November, 2015; both dates are given.

Badge for this model

DDJ-SX2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-sx2"><img src="https://www.savemygig.com/badge/firmware/ddj-sx2.svg" alt="DDJ-SX2 firmware, Save My Gig"></a>

DDJ-SZ2

Clear at 1.04 or later
Documented faults on the DDJ-SZ2, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.04 Browse mid-set Needle Search did not work on rare occasions.

Ver. 1.04 of 24 October 2017 is the version Pioneer DJ still publish and nothing has been issued since. Its second entry is an improvement to tempo slider accuracy rather than a named defect, so it carries no row above. Versions 1.00 to 1.03 are not documented in the published change history and nothing is claimed about them here.

Badge for this model

DDJ-SZ2 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-ddj-sz2"><img src="https://www.savemygig.com/badge/firmware/ddj-sz2.svg" alt="DDJ-SZ2 firmware, Save My Gig"></a>

DJM-900SRT

Clear at 1.13 or later
Documented faults on the DJM-900SRT, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.13 Power mid-set Standby could not always be cancelled with the LFO FORM (WAKE UP) control.

Badge for this model

DJM-900SRT safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-900srt"><img src="https://www.savemygig.com/badge/firmware/djm-900srt.svg" alt="DJM-900SRT firmware, Save My Gig"></a>

DJM-2000NXS

Clear at 3.21 or later
Documented faults on the DJM-2000NXS, and the firmware version that fixed each one
Fixed in Area What was happening below that version
3.21 Recording Audio could not be recorded on macOS 10.13.2.
3.19 Audio mid-set A buzzing noise could be heard when a DJ application switched sampling rates while the mixer’s USB soundcard was in use.

Ver. 3.21 is the highest published version and Pioneer DJ render its date two ways on their own material, 10 July 2018 in the change history and 7 October 2018 on the article, which is the ordinary 07/10 ambiguity. Ver. 3.20 added KUVO support and 3.18 improved SIDECHAIN REMIX and added manual effects to it, both additions rather than named defects, so neither carries a row. The history has no version below 3.18, and that is the answer to the DJM-2000 question rather than a gap: 3.18 is where the two products converged. The DJM-2000 is a different product with its own history, so it has no row here. The two share a firmware filename from 3.18 onward and that is not permission to flash either machine with the other file.

Badge for this model

DJM-2000NXS safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-djm-2000nxs"><img src="https://www.savemygig.com/badge/firmware/djm-2000nxs.svg" alt="DJM-2000NXS firmware, Save My Gig"></a>

XDJ-1000

Clear at 1.13 or later
Documented faults on the XDJ-1000, and the firmware version that fixed each one
Fixed in Area What was happening below that version
1.13 Performance mid-set BPM does not return to the displayed value after Sync is used.
1.13 Sound mid-set A popping noise is heard on a loop with QUANTIZE and Master Tempo both on.
1.12 Playback mid-set Unspecified playback and track-selection issues.
1.12 Performance mid-set Unspecified SLIP HOT CUE issues, and a SEARCH cursor issue.
1.10 PRO DJ LINK mid-set PRO DJ LINK features are disabled when linked to a CDJ-2000NXS2 or an XDJ-1000MK2.
1.10 Playback mid-set AIFF files at 24-bit/48 kHz stop playback partway through.
1.10 Sound mid-set WAV files produce white-noise distortion.
1.05 USB Some USB hard disks are not recognised.
1.05 Sound mid-set Noise is heard with Master Tempo turned on.
1.04 Playback mid-set Freezes loading a track that carries a rekordbox 3.1 memory-cue comment.

Badge for this model

XDJ-1000 safe firmware badge

Paste this on a forum sticky, a school page or a venue note. It shows the safe version and links back here, and it updates itself when the matrix does.

<a href="https://www.savemygig.com/knowledge/pioneer-dj/firmware#fw-xdj-1000"><img src="https://www.savemygig.com/badge/firmware/xdj-1000.svg" alt="XDJ-1000 firmware, Save My Gig"></a>

The data behind this page

Every row on this page, as a file you can use: JSON and CSV, one row per documented fault, with the safe version per model and the maker's document each row rests on. Free to reuse, quote and republish with credit and a link to this page. Licence: CC BY 4.0. It is regenerated from the same source as the page, so the two cannot disagree.

How to read this

A version in the "Fixed in" column is the release that resolved that fault. Anything below it still has the fault. Anything at or above it does not.

The mid-set marker is ours, not the maker's. It flags faults whose documented symptom can interrupt a set already in progress, so you can tell a real risk from an inconvenience at a glance. Everything else on this page is the vendor's own wording, condensed.

Faults only. Feature additions are left out on purpose, because a missing feature does not end a set. Units without firmware are not listed; units with no fault on record show the last version published. Found something we have wrong? Tell us and we will check it against the source.

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it