Booth briefing. The DJM-900SRT is the Serato edition of the first-generation DJM-900nexus: four channels, six SOUND COLOR FX, thirteen BEAT EFFECTS, PRO DJ LINK over LAN, and a Serato sound card built into the mixer so one USB cable replaces an external interface. Scratch control runs off Serato control vinyl or the two control CDs it shipped with, and rekordbox dvs is supported through the Plus Pack. It needs its driver installed on both Windows and macOS, and no USB drive ever goes into it.
Fast Lane
DJM-900SRT: equipment profile
The DJM-900nexus mixer with a Serato sound card built into it: four channels, six Sound Color FX, 13 Beat Effects, and one USB cable where an external interface used to go.
- Sound out
- A built-in sound card for Serato DJ. The mixer selects itself as the audio device when Serato DJ launches, so there is nothing to set up beyond the USB cable.
- Channels and effects
- Four channels, six Sound Color FX (SPACE, DUB ECHO, GATE/COMP, NOISE, CRUSH, FILTER) and 13 Beat Effects, with the playing track’s BPM and beat position arriving over USB so the effects land on the beat.
- Computer and driver
- The driver software is not optional on either platform: Windows and macOS both need it installed before the mixer will pass computer audio at all.
- Ports
- Four phono and four CD/LINE inputs, four coaxial digital inputs, two microphone inputs, send and return, XLR and RCA master, and a LAN link terminal for PRO DJ LINK.
- Power
- AC 110 V to 240 V at 50 or 60 Hz, drawing 41 W in use and 0.4 W on standby.
- Dimensions and weight
- 33.1 cm wide, 40.4 deep, 10.8 tall (13 × 15.9 × 4.2 in). 7.1 kg / 15.7 lb.
- Released
- 2013
The five things that decide your gig
The DJM-900SRT in five points, each linked to its section.
Fader start does nothing while Serato DJ is in Absolute mode.
Press one of the FADER START buttons with Absolute mode set for DVS and the button flashes, then turns off. Pioneer document it as designed behaviour, not a fault.
If you need fader start on this mixer, you are not in Absolute mode. Decide which of the two you want before the set, not during it.
The fader start buttons do not match the deck numbers.
In Serato DJ, button 1 starts DECK 3, button 2 starts DECK 1, button 3 starts DECK 2, button 4 starts DECK 4.
Nothing on the panel tells you that. Pressing button 1 and watching deck 3 take off is the moment most DJs find out.
This is the first nexus mixer with a Serato card, not the NXS2.
Pioneer's own words in the manual: it carries over the main functions, quality and performance of the Pioneer DJM-900nexus. The layout, the effects and the sound are that mixer's.
So anything you know about the DJM-900NXS applies here, and anything specific to the NXS2 does not.
The driver is not optional, on Windows or on macOS.
The mixer passes no computer audio at all until the driver software is installed. It is not class compliant.
Install it at home. A venue laptop that has never seen this mixer is a twenty minute problem at the worst possible time.
Below firmware 1.13 it can refuse to wake from standby.
Pioneer DJ's own words for the one thing Ver. 1.13 fixes: "Standby mode sometimes could not be canceled when the [LFO FORM (WAKE UP)] button was pressed."
A mixer that slept between sets and will not come back looks dead. The button that wakes it is labelled LFO FORM, which is nowhere you would look.
Official equipment video
Note: This feature requires an internet connection.
What to watch for
Fader start does nothing in Absolute mode
Short answer. Nothing is broken on the DJM-900SRT. Pioneer's own Operating Instructions state it: "The FADER START function cannot be used when attempting to perform DVS control while Serato DJ is set to the Absolute mode. When one of the FADER START buttons is pressed while the Absolute mode is set, that button flashes then turns off."
Why this happens. Absolute mode ties the needle position on the control record to the position in the track. Fader start would have to seize playback and move it to a cue point, which is the one thing Absolute mode exists to prevent. Rather than let the two fight, the mixer refuses the request and shows you a flash.
Fix it now. Switch Serato DJ out of Absolute mode, to Relative or Internal, and the buttons work. If the set needs the needle to mean the track position, keep Absolute and start tracks by hand.
Avoid it next time. Pick the mode on purpose at soundcheck. A DJ who discovers this on the first changeover loses the first transition, every time.
The fader start buttons do not match the deck numbers
Short answer. In Serato DJ, button 1 starts DECK 3, button 2 starts DECK 1, button 3 starts DECK 2, button 4 starts DECK 4. Printed in the manual, nowhere on the panel.
Why this happens. The mixer's four channels and Serato's four decks are numbered by two different people. Pioneer published the mapping rather than changing it, so the mixer and the software disagree by design and the document is the only place the translation exists.
Fix it now. Learn the two that bite: button 1 is deck 3 and button 2 is deck 1. Buttons 3 and 4 are closer to what you would expect but still worth checking before you trust them.
Avoid it next time. Test all four at soundcheck with the channel faders down. Thirty seconds, and it tells you which button you actually want under your hand.
Which DJM-900 this actually is
Short answer. The first nexus mixer, not the NXS2. Pioneer's own sentence in the manual is that this unit carries over the main functions, quality and performance of the Pioneer DJM-900nexus.
Why this matters. It decides which answers apply. The layout, the effect vocabulary and the audio design are the DJM-900nexus. What is different is the card inside it: a Serato sound card in place of the nexus unit's own, which is the entire reason the model exists.
Why there was never a second one. The DJM-900NXS2 folded Serato support into the standard mixer, so a separate Serato edition had nothing left to do. There is no DJM-900SRT MK2, and looking for one is a dead end.
One number that is genuinely different. Depth. This mixer is 404 mm / 15.91 in front to back; the DJM-900NXS is 409 mm. Same width, same height, same weight.
Below firmware 1.13 it can refuse to wake up
Short answer. The DJM-900SRT has exactly one published firmware version, Ver. 1.13 of 15 November 2016, and it fixes one thing, in Pioneer DJ's own words: "Standby mode sometimes could not be canceled when the [LFO FORM (WAKE UP)] button was pressed."
Why this matters in a booth. A mixer that has slept between sets and will not come back looks broken. It is not, and the control that wakes it is the LFO FORM button, which carries WAKE UP as a second label. Nobody looks there under pressure. Below 1.13 that button can simply fail to do its job.
Fix it now. If a mixer will not wake, press LFO FORM rather than reaching for the power switch. If that fails, a power cycle is the way back. Then find out which version it is on.
Avoid it next time. This update was released alongside the DJM-900NXS Ver. 1.32, which fixes the identical fault on that mixer, so a venue running one of these is often running both. Worth a question to the technical contact before a residency.
Where to find it is not obvious. Pioneer DJ's support page for this mixer is marked archived, and its Firmware Update section lists nothing at all. The version above comes from their own news release, not from that page, which is why it is easy to conclude there is no firmware here. There is.
Compatibility and setup
The Serato sound card, and what it replaces
Short answer. The sound card is inside the mixer and it is built for Serato DJ. One USB cable from the laptop and the interface that used to sit in the booth is gone.
What the manual promises. That when Serato DJ is launched, this unit is automatically selected as the sound device. So there is no audio device to pick in the software, which is the step that most often goes wrong on a borrowed laptop.
What it does not do. It is not a rekordbox control port and there is no USB drive slot anywhere on the mixer. No stick goes into this mixer, so drive format is not a question you ever have to answer here.
Control vinyl, control CDs and rekordbox dvs
Short answer. Serato DJ's scratch control runs off CONTROL VINYL or CONTROL CD, and the mixer shipped with 2 Serato DJ control CDs in the box.
If the box is long gone. The control CD is treated as a consumable by Pioneer, who state in the manual that a worn or broken one is not covered by the warranty even inside the warranty period. Plan on sourcing your own rather than assuming the venue has a set.
rekordbox dvs as well. Pioneer DJ's own product page names the rekordbox dvs Plus Pack for scratch control with a rekordbox library on this mixer. So the mixer is not Serato only, but Serato is what the internal card was built around.
The mode trap. Absolute mode disables fader start. That interaction is the single most reported surprise on this mixer and it has its own panel above.
The driver is not optional
Short answer. Install the driver software on the computer before the gig, on Windows and on macOS alike. The manual is unambiguous that it has to be in place beforehand.
Why this happens. The mixer is not class compliant. Without the driver the operating system has no path to the internal card at all, so the symptom is total: no computer audio, and a USB indicator that is off or flashing rather than lit.
Fix it now. Install or reinstall the driver, then check the version on the Settings Utility's About tab. The utility also carries the MIXER INPUT, MIXER OUTPUT, ASIO, About tabs, which is where output routing and the Windows ASIO buffer live.
Avoid it next time. Treat the driver as part of the rider. If you ever play a room with this mixer installed, the driver belongs on your laptop permanently, not downloaded on the venue's wifi.
One mixer per computer
Short answer. Pioneer's own line: "Operation cannot be guaranteed when multiple units of this mixer are connected to a single computer."
Why this matters. It is not a warning about two laptops on one mixer, which is the normal changeover. It is about two of these mixers on one machine, which happens in a festival booth where a single laptop is patched across two mixers, or in a studio with two of them on the bench.
Do this. One mixer, one computer. If a changeover needs both mixers live, it needs both laptops.
Dimensions and weight
Width: 331 mm / 13.03 in
Height: 107.9 mm / 4.25 in
Depth: 404 mm / 15.91 in
Weight: 7.1 kg / 15.7 lb
Depth is the number that decides whether it fits, and it is the one figure that differs from the DJM-900NXS, which is 409 mm. Measure the booth shelf front to back.
Sources. Pioneer DJ's own Operating Instructions, document DRB1718, Specifications, General.
If something goes wrong
No sound from the computer
Short answer. On the DJM-900SRT, a computer that produces no sound through the mixer is the input selector switch not set to USB, the driver not installed, or the application pointed at another audio device.
Check in this order. The input selector switch on the channel set to USB. The driver installed, which the USB indicator tells you: off or flashing means the computer and the mixer have not agreed. Then the application's own audio device setting.
One cable rule. The manual says to connect the mixer and the computer directly with the supplied USB cable. A hub in the middle is the first thing to remove when this goes wrong.
The master is quiet, or it distorts
Short answer. On the DJM-900SRT, quiet or distorted master sound is the manual asking whether MASTER ATT. is set to -6 dB on the USER SETUP screen, and whether TRIM has the channel peaking at about 0 dB.
Why this happens. MASTER ATT. is a deliberate pad on the output, set on the USER SETUP screen, and a mixer inherited from the previous DJ can be carrying it. Nothing on the front panel shows it.
Fix it now. Check MASTER ATT. before you touch the master level. Then set TRIM so the channel level indicator peaks at about 0 dB, and the master level so the master indicator does the same.
A turntable sounds wrong and TRIM does nothing
Short answer. On the DJM-900SRT, a turntable with its own built-in phono equaliser belongs in CD/LINE and not PHONO. In PHONO the sound distorts and the channel level indicator does not respond to TRIM at all.
Why this happens. A deck with a built-in phono equaliser is already outputting line level. Putting line level into a phono input runs it through a second stage of gain and equalisation that it does not need.
Fix it now. Move the deck to CD/LINE, or set the deck's own PHONO and LINE switch to PHONO so it outputs a raw cartridge signal. The same applies to a computer audio interface patched in between: if its output is line level, it goes to CD/LINE.
A channel will not crossfade
Short answer. On the DJM-900SRT, a channel that will not crossfade is the CROSS FADER ASSIGN (A, THRU, B) switch for that channel pointed at THRU.
Fix it now. Set that channel's switch to A or B depending on which side of the crossfader you want it on. THRU takes the channel off the crossfader entirely, which is the right setting for a four channel mix and the wrong one the moment you reach for the crossfader.
The digital output is silent
Short answer. On the DJM-900SRT, silence on the digital master output is the Digital Master Out Sampling Rate on the CLUB SETUP screen not matching what the receiving device accepts.
Fix it now. Set Digital Master Out Sampling Rate on the CLUB SETUP screen to a rate the receiving device accepts. A processor or recorder that expects one rate and is handed another reports nothing and passes nothing.
A feedback loop at a volume nobody chose
Short answer. The Settings Utility lets you choose what the mixer sends back to the computer per channel, and some of those choices can loop. Pioneer's own warning: "When using for applications other than recording, pay attention to the DJ application’s settings so that no audio loops are generated. If audio loops are generated, sound may be input or output at unintended volumes."
Why this happens. The post-fader, crossfader and record-mix options exist for recording a set. Pick one of them while the DJ application is also routing audio back out through the mixer and the signal has a path to itself.
Fix it now. Open the Settings Utility's MIXER OUTPUT tab and set the channels back to a control tone or a plain input source unless you are deliberately recording. Check the DJ application's own routing at the same time, because the loop needs both ends to exist.
Avoid it next time. Set the recording routing up at home and leave it alone. This is not a setting to explore during a set, and the manual's phrase "unintended volumes" is doing a lot of quiet work.
Audio dropouts, and the buffer that fixes them
Short answer. On the DJM-900SRT under Windows, the ASIO buffer size is on its own tab in the Settings Utility, and the trade is stated plainly by Pioneer: "If the buffer size is made large, drops in audio data (breaks in the sound) occur less easily, but the time lag due to the delay in the transfer of the audio data (latency) increases."
The step people miss. Quit the DJ application before changing the buffer. The manual says so, and the utility cannot reliably change it under an application that is holding the device.
Fix it now. Raise the buffer until the breaks stop, then stop raising it. Scratch DJs feel the latency long before a mixing DJ does, which is why there is no single correct value to recommend here.
The BPM will not read, or reads wrong
Short answer. On the DJM-900SRT, a BPM that will not read or reads implausibly is the input level: TRIM should have the channel peaking at about 0 dB, and some tracks cannot be measured at all, which is what the TAP button is for.
Why this happens. The counter needs a signal in range to work on. Too quiet and there is nothing to measure, too hot and the transients it looks for are squashed flat.
Fix it now. Set TRIM properly first. If a track still refuses, tap it in. The manual also notes that a measured BPM can differ slightly from a printed one because the two are measured differently, which is not a fault on either side.
Five effects cannot be pre-listened, by design
Short answer. On the DJM-900SRT, ECHO, REVERB, ROLL, SLIP ROLL and REV ROLL cannot be pre-listened through the BEAT EFFECTS CUE button, because the circuit that generates the echo sits after the effect circuit. The manual states plainly that this is not a malfunction.
Why this matters. Pressing CUE on one of those five and hearing the dry signal reads as a broken effect. It is the signal path, not the effect: the echo tail is generated downstream of the point the cue circuit listens at.
Do this. Rehearse those five at home rather than auditioning them in headphones mid-set. On this mixer, the only place to hear them is the master.
Features, tips and maintenance
SOUND COLOR FX and BEAT EFFECTS
Short answer. 6 SOUND COLOR FX, one COLOR knob per channel, and 13 BEAT EFFECTS on top.
The six by name. SPACE, DUB ECHO, GATE/COMP, NOISE, CRUSH, FILTER. Knowing them before the gig is faster than hunting for them with a full floor.
Why the effects land on the beat. The playing track's BPM and beat position arrive over USB from Serato DJ rather than being guessed from the audio, and quantize mode corrects the timing even when the button press is late.
X-PAD. One finger engages a BEAT EFFECT and adjusts its parameter in the same gesture, which is the control most worth practising on this mixer.
The faders, and how long they last
Short answer. The crossfader uses a magnetic system rated by Pioneer at over 10 million operations. The channel faders are quoted at approximately three times greater operation durability as compared to a previous Pioneer model (DJM-800).
Why it is built that way. Both fader types ride on two metal shafts, which Pioneer credit for the lack of wobble and for keeping liquid and dust out of the fader itself. On a Serato mixer that expects scratching, the crossfader is the part under the most abuse.
What that means for a used unit. A rated life is not a warranty and a thirteen year old mixer has had a life you cannot see. Check the crossfader for cuts that do not open or close cleanly before you build a set around it.
The I/O, sampling and converters
Inputs. 4 phono, 4 CD/LINE and 4 coaxial digital inputs, plus 2 microphone inputs, one on a combined XLR and phone jack and one on a phone jack, and a RETURN input.
Outputs. Master on XLR and on RCA, a balanced BOOTH output, REC OUT, SEND, a coaxial digital master output, a MIDI OUT on 5P DIN, and headphones.
Computer and network. One USB terminal, B type, and one LAN terminal (100Base-TX) for PRO DJ LINK.
Audio section. Sampling rate 96 kHz. Master D/A is 32 bits, the other converters are 24 bits. Signal to noise is 105 dB on CD and line, 88 dB on phono and 84 dB on the microphones. Total harmonic distortion is 0.005 %.
Power. AC 110 V-240 V, 50 Hz/60 Hz, 41 W in use and 0.4 W on standby.
Firmware, drivers and manuals
Official downloads and documents
Go to Pioneer DJ for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.
Two different version numbers, and the support page shows neither. Firmware Ver. 1.13 lives in Pioneer DJ's news release of 15 November 2016; the driver version lives on the product page, Ver. 1.1.1 of 21 December 2015. The archived support page's own Firmware Update section lists nothing, so going there first tells you less than the news item does.
Frequently asked questions
Quick answers
- Is the DJM-900SRT the DJM-900NXS or the NXS2?
- The first nexus mixer. Pioneer's own manual says it carries over the main functions, quality and performance of the Pioneer DJM-900nexus. There is no NXS2-based Serato edition, because the DJM-900NXS2 supports Serato itself.
- Why does fader start do nothing?
- Serato DJ is in Absolute mode. Pioneer document that fader start cannot be used in that mode: the button flashes and turns off. Switch to Relative or Internal.
- Which fader start button starts which deck?
- button 1 starts DECK 3, button 2 starts DECK 1, button 3 starts DECK 2, button 4 starts DECK 4. The mapping is not one to one and it is printed only in the manual.
- Does it need a driver?
- Yes, on both Windows and macOS. It is not class compliant and passes no computer audio until the driver is installed.
- Is there firmware to update?
- Yes, one version: Ver. 1.13 of 15 November 2016. It fixes standby mode sometimes not being cancelled by the LFO FORM (WAKE UP) button, so below it a mixer that slept can look dead. The archived support page's Firmware Update section lists nothing, so the version only appears in Pioneer DJ's news release.
- What is the driver version, and is it the same thing?
- No. The driver is Ver. 1.1.1 of 21 December 2015 and it lives on the computer. Firmware lives in the mixer. They are not interchangeable.
- Does it have PRO DJ LINK?
- Yes, over a LAN terminal (100Base-TX).
- Can I use two of these on one laptop?
- Pioneer state that operation cannot be guaranteed when multiple units are connected to a single computer.
- Does a USB drive go into it?
- No. There is no drive slot, so drive format never applies to this mixer.
- How many channels and effects?
- 4 channels, 6 SOUND COLOR FX (SPACE, DUB ECHO, GATE/COMP, NOISE, CRUSH, FILTER) and 13 BEAT EFFECTS.
- When was it released?
- 2013, alongside the DDJ-SP1.
Related mixers
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Pioneer DJ All brands Knowledge base FAQ and Fixes Dictionary
More legacy Pioneer DJ equipment: the full archive index.
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Pioneer DJ's own DJM-900SRT Operating Instructions, document DRB1718, read in full, and Pioneer DJ's own product page, checked 27 October 2026. Specifications theirs, priorities ours.