Released 2025 Reviewed: 18 October 2026

CHORDCAT, field manual

AlphaTheta CHORDCAT portable chord and pattern groovebox control panel, top view

Booth briefing. The CHORDCAT is a portable groovebox from AlphaTheta, a production instrument outside its DJ lines, built for writing chord progressions. It launched in Japan first. Its Chord Cruiser mode suggests compatible chords from a database of up to 110,000 combinations, so you can write progressions without advanced theory. It has 8 tracks of 16 patterns and 128 steps, 145 sound presets and 16 drum kits, and an arpeggiator, delay and ducker on the XY pad. It has no speaker, so it needs headphones or monitors.

Fast Lane

CHORDCAT: equipment profile

A standalone groovebox from AlphaTheta, built around Chord Cruiser, which suggests chords that fit the ones you play.

What comes out
MASTER OUT L/MONO and R on quarter-inch TS jacks, plus a 3.5 mm stereo headphone socket.
Without a computer
Yes. Own sound presets, and no computer needed.
Staying in time
MIDI IN and MIDI OUT/THRU on 5-pin DIN, and MIDI over USB-C.
Computer and driver
USB-C, USB 2.0. The manual names no driver.
Power
Six AA alkaline batteries (not included) or USB-C bus power at 5 V and 500 mA.
Dimensions and weight
24.7 cm wide, 11.1 deep, 3.3 tall (9.7 × 4.4 × 1.3 in). 0.4 kg / 0.9 lb.
Released
2025

Both manuals.

CHORDCAT: five things to know

The CHORDCAT in five points, each linked to its section.

It has no speaker.

Nothing comes out until a lead or headphones go in.

Why it is silent

Six AA cells, or USB-C.

Check the cells before doors open, not after.

Batteries and USB power

It switches itself off when idle.

A long gap between songs is enough to trigger it.

The unit that switched itself off

No clock from the computer? Check Sync Source.

It listens only to the connector you name there.

USB, MIDI and clock

Your manual is for firmware 1.00.

Read the version before you trust a menu.

The manual and the firmware

Official equipment video

Note: This feature requires an internet connection.

What to watch for

Why it is silent

Short answer. The CHORDCAT has no built-in speaker, and a groovebox that looks like a toy will not behave like one at a gig. Sound leaves it on two quarter-inch TS master outputs, L/MONO and R, or on a 3.5 mm headphone socket. If nothing is heard, the manual's checks are: power button, speakers connected to MASTER OUT, the rear VOLUME, a muted track, and the step buttons, which must be lit bright green to trigger anything when Play is pressed.

Batteries and USB power

Short answer. The CHORDCAT runs on six AA alkaline batteries, which are not included, for about five hours, or on USB-C bus power at 5 V and 500 mA. When a USB cable is connected, power comes from it even with batteries loaded, and the manual warns that plugging or unplugging the cable can cut the power even then, so switch the unit off first. A low-battery message appears on the display, and old and new cells, or different brands, must not be mixed.

Compatibility and setup

USB, MIDI and clock

Short answer. The CHORDCAT has MIDI IN, MIDI OUT/THRU on 5-pin DIN and a USB-C port, and the USB port cannot go through a hub. For a DAW that does not see it, the manual points at the DAW's own documentation and the cable. For a clock that does not arrive, the Sync Source under MIDI IN Settings has to name the connector the master clock comes in on, USB or MIDI IN. If the computer is restarted while the unit is connected, switch the unit off before doing it.

The manual and the firmware

Short answer. The CHORDCAT manual, DRI1900A, was written for firmware 1.00, and AlphaTheta's help centre carries an Additional Information manual for 1.40, dated 12 March 2026. Through 1.10 to 1.40 it adds user Chordsets that can be saved and recalled, an all-tracks pattern change, four metronome volumes, a Chord Edit mode, real-time recording of external MIDI, and, at 1.40, a MIDI Chord Trigger that plays the chords from an outside keyboard in Fixed, Key-follow or Custom mapping. The Chordcat Manager application imports and exports Chordsets.

Dimensions and weight

Width: 247 mm / 9.72 in

Height: 33 mm / 1.3 in

Depth: 111 mm / 4.37 in

Weight: 0.4 kg / 0.9 lb

Sources. AlphaTheta's own documentation, document DRI1900A, for width, height, depth and weight.

If something goes wrong

The unit that switched itself off

Short answer. The CHORDCAT turns itself off after about 20 minutes with no operation and no MIDI input, and pressing the rear power button brings it back. The display dims after five minutes of nothing and goes out after five more, with touch key 13 left lit, which is normal. The trap is the way power is lost: the manual says the unit will not resume from where it was if the USB cable is pulled or the computer feeding it is switched off before the unit is, so always end a session with the rear power button.

Features, tips and maintenance

Firmware record and known issues

Firmware information. AlphaTheta publish it as an additional information manual, not as a change history. The help centre page lists the one for firmware 1.40.

Known issues. The manual names no defect fixed in any version, so none is listed. That means nothing is published, not that there are none.

Official documentation. AlphaTheta's help centre page for this model →
Found an entry we have missed? Tell us and we will add it.

Taking one to a gig

Pack the lead and headphones. A quarter-inch TS lead will do, as the silence section explains.

Fresh cells, all one brand. Carry a spare set, or a USB-C power source.

Firmware, drivers and manuals

Official downloads and documents

Go to AlphaTheta for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.

Manuals. Official AlphaTheta manual page →

Broken link? Let us know and we'll fix it.

Frequently asked questions

Quick answers

Does the CHORDCAT have a speaker?
No. Use the master outputs or the headphone socket.
What do I check if it makes no sound?
First check that it is switched on and that the rear VOLUME is up. The full checklist is in the silence section.
How is it powered?
Six AA alkaline cells or a USB-C cable, with the details in the battery section.
Why did it switch itself off?
It sat idle for about 20 minutes. The display dimming first is normal.
My DAW does not see it, or no clock arrives. What now?
Take any hub out of the chain first. If only the clock is missing, look at Sync Source.
Is there a firmware update for it?
Yes. The help centre documents up to 1.40.

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: AlphaTheta's CHORDCAT Instruction Manual DRI1900A, read in full, with the Additional Information manual for firmware 1.40 on the help centre page, checked 18 October 2026. Specifications theirs, priorities ours.