Released 2019 Reviewed: 17 October 2026

MC-101, field manual

Roland MC-101 groovebox, top view

Booth briefing. The MC-101 is the smaller of the two grooveboxes in Roland's AIRA series, the compact partner of the MC-707. Roland describes it as the MC-707's sounds, sequencing and effects in a compact four-track version: 16 pads, sample players and the ZEN-Core sound engine. Clips can be shared with the MC-707. Roland positions it for producing tracks and for backing tracks and accompaniment in live performance. It runs on batteries or USB bus power, so it needs no mains socket at the booth.

Fast Lane

MC-101: equipment profile

The compact four-track groovebox of the MC series, powered by cells or USB.

What comes out
OUT (L/MONO, R) on quarter-inch jacks. PHONES on a stereo mini jack. No assignable outs, no send and return, no external input.
Output level
N/A.
Staying in time
MIDI IN and one MIDI OUT. MIDI over USB.
Computer and driver
USB B for audio and MIDI, with Roland's own driver.
Power
Four AA cells or USB bus power (500 mA). No DC input. 716 g with batteries.
Dimensions and weight
22.4 cm wide, 13.2 deep, 6.1 tall (8.8 × 5.2 × 2.4 in). 0.72 kg / 1.6 lb.
Released
2019

Roland's site: specifications, manuals and update history.

MC-101: five things to know

The MC-101 in five points, each linked to its section.

No DC input: four AA cells or USB bus power.

The MC-707 needs its brick; this one cannot use one.

Power, weight and size

Two battery figures from Roland, so plan with the lower.

A set budgeted at five hours can end at three.

Power, weight and size

One output pair, and a mini-jack headphone socket.

Booth headphones need an adaptor.

Audio outputs and headphones

One MIDI out, so a second follower needs a thru box.

It cannot feed two followers directly.

Clock and MIDI

Two SDZ loading faults the MC-707 never had.

They appear when loading files, not mid-set.

Firmware

Official equipment video

Note: This feature requires an internet connection.

Connections and setup

Audio outputs and headphones

Short answer. Everything leaves on one quarter-inch pair, OUT (L/MONO, R), and the headphone socket is a mini jack.

Headphones. The MC-707 takes quarter-inch plugs here. A set of booth headphones with a quarter-inch plug needs an adaptor on the MC-101.

Compared with the MC-707. Nothing leaves on its own channel, because there are no assignable outputs. An outboard effect goes after the machine rather than inside it, because there is no send and return loop. Nothing else comes in, because there is no external input.

Level. N/A. Check the channel against the booth at soundcheck, since it may not match a line source.

Clock and MIDI

Short answer. MIDI IN and one MIDI OUT, plus MIDI over USB.

One MIDI OUT. If this machine is the clock, one other box follows it directly. A second follower needs a thru box, which is extra hardware and one more thing to carry. The MC-707 has two outs and does not need one.

MIDI faults. They are the MC-707's, listed under Firmware.

What the computer needs

Short answer. The MC-101 has a USB B port carrying audio and MIDI, and it needs Roland's own driver: 1.0.3 for macOS Sonoma 14 or later, 1.0.2 for Windows 10 and 11.

USB B is the older square connector. A laptop with only Type-C needs an adaptor or a B-to-C cable, so pack one with the machine.

The port powers the machine too. If a laptop port browns out, the machine goes with it, not just the audio.

The driver is a separate download from the system program. A machine the computer can see but cannot hear is usually the driver rather than the firmware.

Power, weight and size

Short answer. Cells or USB bus power are the only two ways to run it. There is no DC input, so no mains option exists.

Roland's own page gives two different battery figures. The specification table says about 3 hours on alkaline AA cells and about 4.5 hours on Ni-MH. The product text above it on the same page says about five hours on four AA batteries. Plan with the specification figure, the lower one.

The USB route is the one to rely on. A laptop port or a USB battery pack at 500 mA is undemanding, unlike the SP-404MKII's 1.5 A requirement.

716 g, and that figure includes the batteries. 224 mm wide, 132 mm deep, 61 mm tall. It fits in a bag beside a laptop, which is the reason to choose it over the MC-707.

What to watch for

Firmware

Short answer. Six named faults: four shared with the MC-707 and two that belong to the MC-101 alone.

Not on the MC-707, both at 1.81, November 2022. The MV-1 carries the same two. SDZ files could not be loaded once more than 33 SDZ or SVZ files were present, and the drum kit inside an SDZ file could not be loaded.

Shared MIDI faults. The arpeggiator becoming uncontrollable when played from an external MIDI keyboard and the Bank Select MSB and LSB arriving reversed on a clip change, both at 1.82 in June 2023; the arpeggio stopping when the MIDI channel changed, at 1.81.

Shared routing fault. No sound when pads were routed to COMP1 through COMP6 on a DRUM + COMP track, fixed at 1.72 in May 2021. It presents as a part that simply does not arrive.

Same firmware as the MC-707. The two machines share version numbers, dates and fixes. Both stopped at 1.82, and nothing has been published for either since June 2023. The capability releases are the same pair as well: 1.80 of September 2022 for clip save, undo and redo and Roland Cloud pack import, and 1.71 of May 2021 for the scene chain.

Professional tips

Before the gig

Take a USB battery pack rather than spare cells. It also settles which of Roland's two battery figures to believe.

Keep the headphone adaptor in the bag permanently. See Audio outputs and headphones.

Do not plan on a hardware effect inside the mix. If one part needs its own treatment, that is an MC-707 job.

Prepare the card before you leave. Open the library at home on 1.82, so a loading problem shows up there and not at the venue.

Firmware, drivers and manuals

Official downloads and documents

Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.

The version of record for the system program is 1.82. Driver versions are under What the computer needs.

Frequently asked questions

Quick answers

Can I run an MC-101 from a mains adaptor?
No. It has no DC input, only cells or USB.
How long does it last on batteries?
About 3 hours on alkalines and 4.5 on Ni-MH, going by the specification table.
Can I power it from a USB battery pack?
Yes, and it is the steadier choice for a long set.
Why do my headphones not fit?
A quarter-inch plug does not fit a mini-jack socket, so use an adaptor.
Does it have assignable outputs?
No. All audio leaves on the one OUT pair.
How many MIDI outs does it have?
One. The MC-707 has two.
Does it need a driver?
Yes, Roland's own, installed separately from the system program.
Which firmware should it be on?
1.82, which includes the two SDZ loading fixes.
Is its firmware the same as the MC-707's?
Yes, release for release.
What does the published weight include?
716 g including the batteries, which is unusual: most Roland weight figures exclude what powers the machine.

Related grooveboxes

Commonly paired with

What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.

Roland All brands Knowledge base FAQ and Fixes Dictionary

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Roland's own MC-101 specification page, its announcement of 5 September 2019, the owner's manuals index and the published update history to version 1.82, checked 17 October 2026. Specifications theirs, priorities ours.