Released 2019 Reviewed: 17 October 2026

MC-707, field manual

Roland MC-707 groovebox, top view

Booth briefing. The MC-707 is the larger of the two grooveboxes in Roland's AIRA series, with the smaller MC-101 as its compact partner. It has eight tracks, 16 pads, the ZEN-Core sound engine, a TR-REC step sequencer, a sampler and per-track and master effects, with clips triggered in scenes. Roland describes it as a way to create a song or perform a live set without a computer, and its USB audio interface can record each of the eight parts to its own DAW track. In a rig it adds assignable outputs, a send and return loop and two MIDI outs.

Fast Lane

MC-707: equipment profile

The full-size groovebox of the MC series, built for a rig and powered from the mains.

What comes out
MIX OUT (L/MONO, R) and ASSIGNABLE OUT (L, R), all quarter-inch. SEND/RETURN (L/MONO, R) on quarter-inch. EXT IN (L/MONO/MIC, R), with a TRS microphone input. PHONES on a stereo quarter-inch jack.
Output level
N/A.
Staying in time
MIDI IN, MIDI OUT1 and MIDI OUT2. MIDI over USB.
Computer and driver
USB B for audio and MIDI, with Roland's own driver.
Power
AC adaptor drawing 2,000 mA. No battery or USB bus power option. 2.1 kg without the adaptor.
Dimensions and weight
42.6 cm wide, 26.3 deep, 6 tall (16.8 × 10.4 × 2.4 in). 2.1 kg / 4.6 lb.
Released
2019

Roland's site: specifications, manuals and update history.

MC-707: five things to know

The MC-707 in five points, each linked to its section.

Mains only, and nothing to fall back on.

It is the one piece of this rig that cannot be improvised at a venue.

Power, weight and size

Four quarter-inch outputs: a mix pair and an assignable pair.

It is two more channels than a mixer expects from one box.

Audio inputs and outputs

A send and return loop, and an EXT IN that doubles as a mic channel.

Those are the two sockets the MC-101 does not have.

Audio inputs and outputs

Two MIDI outs, so it can sit at the centre of a hardware rig.

The MC-101 has one.

Clock and MIDI

Its named faults cluster around MIDI.

All four are fixed by 1.82.

Firmware

Official equipment video

Note: This feature requires an internet connection.

Connections and setup

Audio inputs and outputs

Short answer. Two output pairs, a send and return loop and a line input, all on quarter-inch jacks, with a quarter-inch headphone socket.

Assignable outputs. This pair is the reason to bring the MC-707 rather than the MC-101. A part routed there leaves the machine on its own two jacks, so the engineer can treat it as a separate source: compress the kick, side-chain something against it, or send a vocal part somewhere the rest of the mix does not go.

Send and return. An outboard pedal or rack unit sits inside the machine's mix rather than after it, so a hardware effect can go on one track instead of on everything.

EXT IN. It is a line pair. Select MIC and the left jack becomes a TRS mic input. From firmware 1.71 of May 2021, the delay and reverb sends apply to EXT IN and PC IN too.

Level. N/A. Set it against the booth at soundcheck, and set the assignable pair separately: the mixer will treat those two jacks as one more source rather than as part of the mix.

Clock and MIDI

Short answer. One MIDI in and two MIDI outs, all on five-pin DIN, plus MIDI over USB.

Two MIDI outs. Two machines can take their clock and their notes from this one without a thru box in the chain. The MC-101 has one out, so a second follower there needs a thru box.

MIDI faults. Three of the four named faults are MIDI, and all three are fixed by 1.82. They are listed under Firmware.

If the MC-707 is the clock for the set, check its version first. A rig where the arpeggio and the clip changes have to be right is exactly the rig those three fixes are about.

What the computer needs

Short answer. One USB B port carries audio and MIDI, and it needs Roland's own driver: 1.0.3 for macOS Sonoma 14 or later, 1.0.1 for Windows 10 and 11.

USB B is the older square connector. A recent laptop with only Type-C needs an adaptor or a B-to-C cable, so pack one with the machine.

The driver is a separate download from the system program. A machine that appears to the computer and produces no audio is usually the driver rather than the firmware.

PC IN. Audio arriving from the computer can sit in the machine's effects alongside its own tracks, through the sends described under Audio inputs and outputs.

Power, weight and size

Short answer. Mains is the only way to run it: no batteries, no USB bus power and no DC alternative.

Plan for the brick the way you plan for the laptop. Keep a spare if the machine is load-bearing in the set, and label it: a 2,000 mA Roland supply is not interchangeable with the small adaptors the rest of a bag tends to hold.

A machine that will not come on is the adaptor or the socket. There is no second power route to test against.

2.1 kg before the adaptor, 426 mm wide and 263 mm deep. It needs a real table rather than a corner of the booth shelf, and at that width it does not share a surface with a laptop comfortably.

What to watch for

Firmware

Short answer. The MC-707 has four named faults, three of them MIDI and one a routing path that goes quiet.

1.82, June 2023. Playing the arpeggiator from an external MIDI keyboard could make it uncontrollable, and when switching clips the MSB and LSB of the Bank Select being sent were reversed. Both matter in a rig where this machine drives other gear.

1.81, November 2022. The arpeggio could stop working correctly when the MIDI channel was changed.

1.72, May 2021. No sound when pads were routed to COMP1 through COMP6 on a DRUM + COMP track. The one fault here that is internal rather than external, and the one that presents as a part simply not arriving.

Same firmware as the MC-101. The two machines share version numbers, dates and fixes, so comparing them by version tells you nothing about either. Both stopped at 1.82 in June 2023.

New features: 1.80 and 1.71. September 2022 added clip save, undo and redo, and Roland Cloud pack import. May 2021 added the scene chain and the effect sends covered under Audio inputs and outputs.

Professional tips

Before the gig

Pack the adaptor first. A venue or another performer is unlikely to have a spare.

Ask for four channels, not two. The assignable pair is only useful if the mixer has somewhere to put it, and that conversation goes better before the engineer has patched the stage.

Decide what the two MIDI outs are for in advance. Plan the wiring before you reach the booth.

Update it once and stop thinking about it. 1.82 is the end of the line.

Firmware, drivers and manuals

Official downloads and documents

Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.

The version of record for the system program is 1.82. Driver versions are under What the computer needs.

Frequently asked questions

Quick answers

Does the MC-707 run on batteries?
No. Mains only.
Can I power it from a USB port?
No, USB here is for data. The machine stays off without the adaptor.
What are the assignable outputs for?
Giving one part its own channel at the mixer. The MC-101 has none.
Does it have a send and return loop?
Yes, and the MC-101 does not have one.
Can I plug a microphone into it?
Yes, through EXT IN.
What output level does it run at?
N/A, so read it off the mixer meters at soundcheck, assignable pair included.
How many MIDI outs does it have?
Two, OUT1 and OUT2.
Does it need a driver?
Yes, Roland's own, installed separately from the system program.
Which firmware should it be on?
1.82, which carries every fix Roland have published.
Is the MC-101 just a smaller MC-707?
No. They share firmware releases, but the sockets and the power differ a lot.

Related grooveboxes

Commonly paired with

What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.

Roland All brands Knowledge base FAQ and Fixes Dictionary

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Roland's own MC-707 specification page, its announcement of 5 September 2019, the owner's manuals index and the published update history to version 1.82, checked 17 October 2026. Specifications theirs, priorities ours.