Released 2014 Reviewed: 26 October 2026

RMX-500, field manual

Pioneer DJ RMX-500 remix station, top view of the control surface

Booth briefing. The RMX-500 is a remix station in Pioneer DJ's RMX line: a standalone effects unit that processes whatever is already playing rather than adding a channel of its own. It has three effect sections, Rhythm FX, Scene FX and Release FX, and it patches into a mixer's effects send and return or connects to a computer over USB. For a DJ it is a hands-on way to build tension, break a track down and bring it back, on top of any mixer or software that has a send and return.

Fast Lane

RMX-500: equipment profile

A standalone remix effects unit.

Ports
RCA in and out, USB Type B, AC-adaptor input. SIGNAL LEVEL: +4 dB, 0 dB, -10 dB.
Dimensions and weight
30.6 cm wide, 13.2 deep, 6.7 tall (12 × 5.2 × 2.6 in). 0.93 kg / 2.1 lb.
Released
2014

The five things that decide your gig

The RMX-500 in five points, each linked to its section.

It is three effect sections in a fixed order, and only two of the three can be swapped.
No sound or a distorted sound is almost always the SIGNAL LEVEL switch.

Check the switch before you suspect the unit.

No sound, low sound or distortion

One firmware version, and its two fixes are on the computer side.

The plug-in is a separate software product.

Firmware, the plug-in update, and what is actually published

It doubles as a USB sound card the moment it is plugged into a computer.
Pioneer DJ still check it against macOS Sequoia, even though the support page is archived.

Check the compatibility table, not the archive.

What Pioneer DJ do and do not say about its future

Official equipment video

Note: This feature requires an internet connection.

What to watch for

What Pioneer DJ do and do not say about its future

Short answer. Pioneer DJ’s support page for this model is archived, but the RMX-500 is still named on Pioneer DJ’s current macOS Sequoia compatibility table (14 November 2024) under DJ Effectors, marked "Verification complete." Archived and still checked for compatibility are not the same thing.

The signal path, and the order the effects run in

Short answer. The three effect sections sit in a fixed signal path, Rhythm FX then Scene FX then Release FX, except that Rhythm FX and Scene FX can be swapped in order; Release FX always comes last.

Release FX cuts off the other two. Three Release FX types (Vinyl Brake, Echo, Back Spin), selected on a type button and triggered on a separate Release FX button; the effect is live only while the button is held down, and releasing it also cancels any Rhythm FX or Scene FX that were still on.

Why this matters at a changeover. An RMX-500 that "stops doing the effect" mid-set is very often just that button being released, not a fault. At a changeover, check whether Release FX is still held.

Compatibility and setup

What goes in and what comes out

Terminals. one stereo RCA input and one stereo RCA output, a 6.3 mm stereo headphone jack, and a USB Type B port for computer control and audio; power comes from either the included AC adaptor or USB bus power, and Pioneer DJ specifically warn against using a USB hub.

The SIGNAL LEVEL switch. a SIGNAL LEVEL switch with three positions, +4 dBu, +0 dBu and −10 dBV, set to match the output level of whatever is connected to the input

Audio specification. 48 kHz sampling with 24-bit A/D and D/A conversion, 20 Hz to 20 kHz frequency response, a 96 dB signal-to-noise ratio (A-weighted) and total harmonic distortion of 0.006%, with 15 dB of headroom

Power. an included AC adaptor (input AC 100-240 V, 50/60 Hz; output DC 5 V, 2 A) or USB bus power; the main unit draws 600 mA on the adaptor or 500 mA on USB bus power, and button lighting runs dimmer on bus power

Dimensions and weight

Width: 306 mm / 12.05 in

Height: 67 mm / 2.64 in

Depth: 132 mm / 5.2 in

Weight: 0.93 kg / 2.1 lb

What that means in the booth. It is a small unit, light enough to sit on top of a mixer's chassis rather than need a rack space of its own, which is how Pioneer DJ designed it to be used.

Sources. Pioneer DJ's own specification figures, for width, height, depth and weight.

If something goes wrong

It will not power on

Short answer. If the RMX-500 will not power on, Pioneer DJ’s own checklist is: confirm the power cord is seated in the AC adaptor and the adaptor’s DC plug is seated in the unit, confirm the ON/STANDBY switch is set to ON, and, if running on USB bus power, confirm the USB cable is connected directly to the computer rather than through a hub.

No sound, low sound or distortion

No sound or low sound. For no sound or low sound, Pioneer DJ’s checklist is to confirm the connection cables and terminals are clean and properly seated, and to check whether the INPUT peak-level indicator is lit, which points to the connected device’s output level rather than the RMX-500 itself.

Distortion. For distortion, check whether the INPUT or OUTPUT peak-level indicator is lit red; Pioneer DJ’s fix is to set the SIGNAL LEVEL switch to match the connected device’s output level and adjust that device’s output accordingly.

Tempo (BPM) will not read, or looks wrong

Short answer. If the RMX-500 cannot measure tempo (BPM), or the reading looks wrong, check whether the input level is too high or too low and adjust the SIGNAL LEVEL switch and source output to bring the INPUT peak-level indicator to a normal range; for tracks it still can’t read, Pioneer DJ’s documented fallback is to tap the tempo in manually with the TAP button. A BPM reading that differs slightly from the value printed on a CD, or from what a DJ player, mixer or DJ software reports for the same track, is normal: different gear measures BPM in different ways.

Customised effect settings did not stick

Short answer. If customised settings on the RMX-500 don’t stick, Pioneer DJ’s documented cause is powering off too soon after customising; their fix is to wait at least 10 seconds after a change before switching the unit off.

The computer stops recognising the unit

Short answer. If the computer stops recognising the RMX-500, the documented fix is the included USB cable straight into the computer, with no hub between.

Features, tips and maintenance

Rhythm FX, Scene FX and Release FX, in full

Rhythm FX. Five buttons, each a different effect or an internal drum sound (Kick, Snare, Clap, Hi Hat, Cymbal), applied by turning the Rhythm FX control; the effect’s strength also responds to how hard the control is pressed in, not only how far it’s turned. A 4-Beat Sequencer records the order and timing of Rhythm FX button presses (via the Overdub button) and loops them back, with a Delete button to remove one recorded button’s part at a time.

Scene FX. Ten build-up and breakdown effect types on the Scene FX buttons (the manual names Noise, Echo, Spiral Up and Reverb Up on the build-up side and Crush, Echo, Spiral Down, Reverb Down, HPF and Zip/LPF Down on the breakdown side), turned and pressed in the same two-stage way as Rhythm FX, plus a separate Noise volume control and an Echo+ function that layers an echo, synced to a selectable beat multiple, over whatever Scene FX effect is already running.

Release FX. Vinyl Brake, Echo or Back Spin. How it cuts the other two is under The signal path.

Customising a button's effect. Holding the Customize Shift button while pressing an effect button cycles that button’s effect type and tempo-sync beat; only a lit button can be customised this way, and the change takes effect immediately.

The computer plug-in, and the built-in sound card

The plug-in. The RMX-500 Plug-in, a VST/AU/RTAS plug-in Pioneer DJ published so the unit can drive the same effects engine from inside a music-production app, with the hardware acting as its controller. This is a separate software product from the hardware unit’s own firmware.

The sound card. A built-in USB audio interface: connecting the unit to a computer over its USB Type B port doubles it as a 1 in/1 out stereo sound card, in addition to any effects processing.

Firmware, drivers and manuals

Firmware, the plug-in update, and what is actually published

Hardware firmware. One firmware version is published for the RMX-500: Ver. 1.08, dated 12 February 2014 in Pioneer DJ’s own change history document and 13 February 2014 on their help centre page. That history names two fixes, both on the computer side rather than in the effects engine: the output level dropped when the unit was used as a USB audio interface, and on some computers it would not work as a plug-in controller. The updater Pioneer DJ publish for it runs on Windows, and no macOS equivalent is listed.

The plug-in is a separate thing. The RMX-500 Plug-in is software, not firmware, and is described under The computer plug-in, and the built-in sound card.

How the hardware update is applied. Pioneer DJ’s own update method for this unit is to connect it by USB, power it on while holding Release FX and Tap together to enter update mode, then run the update software from the support site; the unit must not be power-cycled mid-update.

Official downloads and documents

Go to Pioneer DJ for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.

Manuals. Official Pioneer DJ manual page →

Broken link? Let us know and we'll fix it.

Frequently asked questions

Quick answers

What is the RMX-500?
A remix station with three effect sections, used beside a mixer or from a computer.
Is there firmware for this unit?
One version, 1.08, with two fixes for computer use.
Why is there no sound, or why is it distorted?
Check the INPUT and OUTPUT peak lights, then the SIGNAL LEVEL switch.
Why does the BPM reading look wrong?
Level first, then enter it by hand with TAP. A CD's printed BPM can differ slightly, which is normal.
My customised effect settings did not save.
Powering off too soon loses them, so give it 10 seconds.
Can it be used as a sound card?
Yes, over USB Type B.
What does the RMX-500 Plug-in do?
It lets the unit act as a controller for the same effects inside a music-production app.
In what order do the effect sections run?
Rhythm, Scene, Release. Only the first two can trade places.
Is it still supported by Pioneer DJ?
Pioneer DJ still lists it as verified for macOS Sequoia.
What are its dimensions and weight?
See Dimensions and weight, from Pioneer DJ's own figures.

Playing soon and it is not working?

Start Emergency Mode

Related effectors

Commonly paired with

What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.

Pioneer DJ All brands Knowledge base FAQ and Fixes Dictionary

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Pioneer DJ's RMX-500 Operating Instructions (DRI1210) and Quick Start Guide (DRH1251A), and Pioneer DJ's current support status page, checked 26 October 2026. Specifications theirs, priorities ours.