Booth briefing. The TORAIZ SQUID is a multitrack sequencer in Pioneer DJ's TORAIZ range: a central brain that plays other instruments rather than making sound itself. It holds 16 tracks, 64 patterns and 128 projects, and it drives synthesizers, drum machines and samplers over MIDI, USB, CV and gate, and analogue clock and DIN sync, so MIDI and analogue gear can run from one sequencer. For a DJ or live performer it is the piece that keeps a rig of hardware instruments playing in time, with its sound coming from the machines it controls.
Fast Lane
TORAIZ SQUID: equipment profile
A standalone multitrack sequencer from Pioneer DJ's TORAIZ family, 2019, with 16 tracks and no sound engine.
- What comes out
- No audio output. MIDI IN, MIDI OUT1 and MIDI THRU/OUT2 on 5-pin DIN, USB, two CV OUT and two GATE OUT on mono mini jacks, CLOCK IN and OUT on stereo mini jacks, and DIN SYNC OUT1 and IN/OUT2 on 5-pin DIN.
- Staying in time
- Sync Source is Internal by default, with USB MIDI, DIN MIDI, DIN SYNC and CLOCK as the alternatives. DIN SYNC runs at Sync24 or Sync48, CLOCK at 1, 2, 4, 24 or 48 ppqn, and MIDI and USB are fixed at 24 ppqn. The unit converts between them.
- Computer and driver
- A USB Type-B port, straight to the computer. From 1.10 the SQUID Manager application backs up projects and converts patterns to and from MIDI files.
- Power
- AC adaptor (DC 5 V, 2 A) or USB bus power.
- Dimensions and weight
- 37.5 cm wide, 22.4 deep, 7.2 tall (14.8 × 8.8 × 2.8 in). 1.9 kg / 4.2 lb.
- Released
- 2019
The TORAIZ SQUID Operating Instructions DRI1560A, which describe firmware 1.0, and Pioneer DJ's firmware 1.10 addendum.
The five things that decide your gig
The TORAIZ SQUID in five points, each linked to its section.
It makes no sound, so bring the sound.
The sound comes from the machines it plays.
It switches itself off after about four hours.
Unsaved work goes with it.
A MIDI cable is not a sync cable.
The CLOCK jacks are stereo mini jacks with their own wiring.
CV needs the right port and range.
A pitch that drifts is corrected at the receiver.
A silent machine is a routing problem.
Check port, channel and Sync Source first.
Official equipment video
Note: This feature requires an internet connection.
What to watch for
Why there is no sound
Short answer. The manual calls the TORAIZ SQUID a standalone multitrack sequencer. It sends notes, clock and control voltages and carries no audio at all, so every machine it plays needs its own route to the mixer.
The four-hour auto power off
Short answer. The TORAIZ SQUID ships with auto power off on. After about four hours with no signal in or out and no operation, the unit turns itself off and, the manual states, unsaved data is lost. It may also fail to switch off in some modes, so the manual says to power it off by hand after use. The setting is Auto Power Off in the Etc section of the GLOBAL menu, and Save or Save As on the project protects a patch built during a long soundcheck.
Compatibility and setup
Sync cables
Short answer. A MIDI cable is not a DIN SYNC cable on the TORAIZ SQUID, and a MIDI adaptor is not a clock adaptor. The CLOCK terminals are stereo mini jacks wired sleeve to ground, ring to start and stop, and tip to clock. To reach a 5-pin DIN SYNC socket the manual calls for a conversion cable with pin 1 on the ring and pin 3 on the tip, and it says the stereo mini jack to 5-pin DIN cable made for MIDI cannot be used because pins 1 and 3 are not connected in it.
CV and pitch
Short answer. CV on the TORAIZ SQUID is an analogue voltage, and the manual says that depending on temperature the receiving device may not produce the right pitch, in which case the fix is the Fine tuning on the receiving device and not anything on the SQUID. Two settings decide whether CV arrives at all: the track's output port has to be set to CV/GATE1 or CV/GATE2, and the CV Range has to match the voltage standard the receiver expects, V/Oct or Hz/V.
Power, and the USB limits
Short answer. The AC adaptor supplies DC 5 V at 2 A. With no adaptor the unit takes USB bus power alone. With both connected, the USB port is a backup that takes over automatically if the adaptor is pulled. On bus power the manual restricts the dimming of the buttons, the pad LEDs and the display, and asks for a direct connection to a USB 2.0 or 3.0 port with a certified cable of two metres or less. A hub is ruled out, and Pioneer DJ's firmware 1.10 addendum adds that a hub is not recommended because MIDI delay cannot be guaranteed.
Dimensions and weight
Width: 374.8 mm / 14.76 in
Height: 72.1 mm / 2.84 in
Depth: 223.9 mm / 8.81 in
Weight: 1.9 kg / 4.2 lb
Sources. Pioneer DJ's own documentation, document DRH1508D, for width, height, depth and weight.
If something goes wrong
A machine that does nothing
Short answer. When a machine hangs off the SQUID and stays silent, the cause is almost always routing, not the machine. Work through it in order.
1. Port and channel. Each track sends to one output port on one MIDI channel. The machine has to be listening on that port, and on that channel.
2. MIDI THRU/OUT2. That terminal is either a second output or a pass-through. Set to a THRU choice it repeats what arrives at MIDI IN or USB, so the transmitting device and the receiver must agree on the channel.
3. CV and GATE. For an analogue machine the track's output port has to be CV/GATE1 or CV/GATE2, as under CV and pitch.
4. Sync Source. If nothing starts, check where the SQUID is taking its clock from. An external source that is not sending leaves it waiting.
Features, tips and maintenance
The firmware 1.10 addendum
The TORAIZ SQUID manual, DRI1560A, was written for firmware 1.0, and Pioneer DJ's help centre carries an addendum for 1.10, dated 25 April 2019. It adds SQUID Manager for backing up projects and converting patterns to and from standard MIDI files, Program Change and Bank Select per track, a per-track delay of up to 63 ms, a playback speed set per pattern in place of the old Track Speed, and it removes the MIDI OFF choice from the two MIDI outputs. Read the version under System Info in the GLOBAL menu before trusting the manual.
Official documentation. Pioneer DJ's help centre page for this model →
Found an entry we have missed? Tell us and we will add it.
Taking one to a gig
Pack the sound too. The SQUID is the brain; the machines it plays are the voice. Bring the cables for each.
Bring the right sync cable. The wiring is under Sync cables.
Save before the soundcheck ends. The reason is under the four-hour auto power off.
Plug it straight into the computer. No hub, as under Power, and the USB limits.
Firmware, drivers and manuals
Official downloads and documents
Go to Pioneer DJ for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.
Manuals. Official Pioneer DJ manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- Does the TORAIZ SQUID make sound?
- No. It only plays other machines.
- Why did my SQUID switch itself off?
- Its auto power off is on by default. Check the project is saved before you walk away.
- Can I use a MIDI cable for the CLOCK jacks?
- No. They are stereo mini jacks, not MIDI sockets.
- My synth is out of tune over CV. Is the SQUID wrong?
- Usually not. Tune at the receiver, then check the port and the CV Range.
- Can I power it from USB?
- Yes, from a USB 2.0 or 3.0 port or the AC adaptor, never through a hub.
- Is there a firmware update for it?
- Pioneer DJ publish only an addendum, for 1.10.
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Pioneer DJ All brands Knowledge base FAQ and Fixes Dictionary
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Pioneer DJ's TORAIZ SQUID Operating Instructions DRI1560A, read in full, with the quick start guide DRH1508D and the firmware 1.10 addendum on the help centre page, checked 18 October 2026. Specifications theirs, priorities ours.