Released 2021 Reviewed: 14 November 2026

JX-08, field manual

Roland JX-08 synthesizer, top view

Booth briefing. The JX-08 is a synthesizer in Roland's Boutique series, reintroducing the sound of the 1985 JX-8P, announced in November 2021 with the JD-08. It keeps the JX-8P's two DCOs, filter and envelopes on a full panel of controls, with up to 20 voices, two parts for layers and splits, and a 64-step polyphonic sequencer. It runs on batteries and has a built-in speaker; the K-25m keyboard is sold separately. Next to a mixer it is one stereo source, synced over MIDI, USB or a clock pulse.

Fast Lane

JX-08: equipment profile

The 1985 JX-8P’s two DCOs and full panel, on batteries with its own speaker.

Plays
Up to 20 voices. 256 patches, 128 patterns and a 64-step polyphonic sequencer.
What comes out
OUTPUT and PHONES, both stereo 3.5 mm, and MIX IN on 3.5 mm. Built-in speaker.
Output level
N/A.
Staying in time
MIDI IN and MIDI OUT on five-pin DIN, and EXT CLOCK IN on a mono mini jack. No CV OUT or GATE OUT.
Computer and driver
USB-C for audio and MIDI to a computer, with Roland’s driver.
Power
Four AA cells or USB bus power (500 mA). About 6 hours on Ni-MH. 895 g including the batteries.
Dimensions and weight
30 cm wide, 12.8 deep, 4.7 tall (11.8 × 5 × 1.9 in). 0.9 kg / 2 lb.
Released
2021

Specifications and update history as Roland publishes them.

JX-08: five things to know

The JX-08 in five points, each linked to its section.

Up to 20 voices, with two parts.

DUAL layers them, SPLIT divides the keyboard.

Voices and sound

Audio leaves on 3.5 mm sockets, so bring the cable.

Pack it with the synth.

Audio connections

It follows and sends clock.

Set Sync Source rather than leaving it on Auto.

Clock and MIDI

USB-C, and only a data cable works.

A charge-only cable looks identical.

What the computer needs

The K-25m keyboard is sold separately.

Out of the box it is a module.

Voices and sound

Official equipment video

Note: This feature requires an internet connection.

Connections and setup

Voices and sound

Short answer. Up to 20 voices, with 256 patches and 128 patterns.

Two parts. Part A and Part B can be layered (DUAL) or split across the keyboard (SPLIT). Roland's 20-voice figure is for the instrument.

The panel. Two DCOs, a VCF, a VCA, envelopes and an LFO, with chorus, delay, overdrive, fuzz, bit crusher, phaser and pitch shifter among the effects.

No keyboard in the box. The K-25m is sold separately; without it, the [NOTE] button turns the step buttons into a small keyboard.

Audio connections

Short answer. On the JX-08, OUTPUT and PHONES are both stereo 3.5 mm sockets, and MIX IN is a third.

Cable. Club mixers take quarter-inch or RCA, so bring your own cable: 3.5 mm to dual quarter-inch, or 3.5 mm to RCA. The same lead covers every Boutique on this hub.

Speaker. It has a small built-in powered speaker for checking a patch on a table. It is not an output: everything that reaches the mixer still leaves on the 3.5 mm socket.

MIX IN. It lets another source share the outputs, which is how two Boutiques reach one mixer channel. A hot source arriving there raises what the mixer receives without the JX-08's own level moving.

Output level: N/A. Set it at soundcheck, and again after changing patch.

Clock and MIDI

Short answer. MIDI IN and MIDI OUT on five-pin DIN, one EXT CLOCK IN on a mono mini jack, and MIDI over USB.

Sync Source. The sequencer follows the clock chosen in the Sync Source setting: Auto, its internal clock, MIDI or USB. Auto picks up whatever arrives, so set it explicitly when two clocks could reach the JX-08 at once.

It can send clock too. Sync Out sends MIDI clock from the MIDI connector, the USB port or both, so it can lead another machine rather than only follow one.

EXT CLOCK IN takes a pulse, not MIDI. A drum machine's trigger output or a modular clock steps the sequencer with no MIDI in the chain. There is no CV OUT and no GATE OUT.

What the computer needs

Short answer. The JX-08 has a USB-C port carrying audio and MIDI, so one cable to a computer is the whole connection. It needs Roland's own driver, and a real data cable for updating.

A charge-only USB-C cable will not work. Roland's manual says so directly: charge-only cables cannot carry data. It looks identical, and it is the usual reason a computer does not see the unit.

The driver is a separate download from the system program. Roland publish it to 1.0.2 for macOS Sonoma 14 or later and 1.0.0 for Windows 10 and 11, with older builds kept for macOS 10.14 to Ventura.

USB-C, not micro USB. The older Boutiques on this hub use micro USB, so a bag packed for a JU-06A has the wrong cable.

Power, weight and size

Short answer. The JX-08 runs on four AA cells, Ni-MH or alkaline, or USB bus power at 500 mA. There is no DC input on the connector list.

Roland quote about 6 hours on Ni-MH cells of 1,900 mAh, and no alkaline figure. For a long set, a USB battery pack is the route to rely on.

The published 895 g includes the four batteries. That is the Boutique convention; the K-25m is extra.

300 mm wide, 128 mm deep, 47 mm tall. Two millimetres lower than the JD-08 on the same footprint.

What to watch for

Firmware

Short answer. Version 1.03 is the highest published system program, and it changed nothing you can hear.

The history is two lines. 1.02 of November 2021 fixed minor bugs. 1.03 of November 2025 is a version-number change for management reasons, with specifications unaffected.

Known issues. None known. A unit on 1.02 behaves the same as one on 1.03, so there is nothing to update before a gig.

Check the display. The version shows on the 7-segment display of the JX-08.

Professional tips

Before the gig

Pack the 3.5 mm audio cable and a spare. No venue has one for a Boutique.

Label the USB-C data cable that works. Keep it in the bag with the machine.

Fresh Ni-MH cells or a USB battery pack. The battery figure is Roland's, and it is for Ni-MH only.

Firmware, drivers and manuals

Official downloads and documents

Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.

Roland publish a Reference Manual and a Quick Start for the JX-08.

Frequently asked questions

Quick answers

How many voices does the JX-08 have?
20 at most.
Does it come with a keyboard?
No. The K-25m keyboard is sold separately.
What cable do I need for the house system?
3.5 mm to dual quarter-inch or 3.5 mm to RCA, whichever the mixer inputs take.
Can it send MIDI clock?
Yes, over five-pin MIDI, USB or both.
Does it have CV and GATE outputs?
No. EXT CLOCK IN is its only analogue socket, and it is an input.
Which firmware should it be on?
1.03, though 1.02 behaves the same: 1.03 only changed the version number.
How long does it run on batteries?
Roughly six hours on Ni-MH, by Roland's figure.
Why does the computer not see it?
Usually a charge-only USB-C cable. Use a data cable.

Related synthesizers

Commonly paired with

What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.

Roland All brands Knowledge base FAQ and Fixes Dictionary

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Roland's own JX-08 product and specification pages, its announcement of 9 November 2021, the reference manual and the Updates & Drivers page, checked 14 November 2026. Specifications theirs, priorities ours.