Booth briefing. The TR-08 is a compact drum machine in Roland's Boutique series, a recreation of the TR-808. It models the original's circuits with Roland's Analog Circuit Behavior technology and keeps the 808's sound, look and feel. The sequencer has 16 steps, each with 16 sub-steps for detailed snare fills and rolling hi-hats, and a track-selectable trigger output can drive other instruments. For a DJ it is a small 808 to play live next to the decks.
Fast Lane
TR-08: equipment profile
The Boutique reissue of the TR-808, from Roland's small-format line.
- What comes out
- Audio: one 3.5 mm stereo OUTPUT. Also 3.5 mm: PHONES, MIX IN. TRIGGER OUT: mono 3.5 mm.
- Output level
- N/A.
- Staying in time
- MIDI IN and MIDI OUT. USB and MIDI clock sources from firmware 1.07.
- Computer and driver
- Micro USB type B for audio and MIDI, with Roland's driver (macOS 10.13 and older Windows builds).
- Power
- Four AA cells (Ni-MH or alkaline) or USB bus power (500 mA). About six hours on rechargeables.
- Dimensions and weight
- 30.8 cm wide, 13 deep, 5.1 tall (12.1 × 5.1 × 2 in). 1.3 kg / 2.9 lb.
- Released
- 2017
Roland's own TR-08 specification page and its update history to ver. 1.08.
TR-08: five things to know
The TR-08 in five points, each linked to its section.
Audio is one 3.5 mm jack, so bring the cable.
The club mixer will not have a socket that fits it.
The mixer's USB port will not carry its sound.
Roland is explicit: the audio goes through the analogue output only.
Batteries or USB power.
It can stop mid-set when the cells run out.
Firmware 1.07 or later is the one to have.
Check the version before you rely on USB clock.
Updating needs a micro USB data cable.
A charge-only lead looks exactly like a dead port.
Official equipment video
Note: This feature requires an internet connection.
Connections and setup
Audio output and cable
Short answer. The TR-08 has a single stereo OUTPUT jack on a 3.5 mm miniature phone type, and that is the whole audio output. PHONES and MIX IN are the same size, and TRIGGER OUT is a mono 3.5 mm.
Cable. Club mixers take quarter-inch or RCA, so bring your own cable: 3.5 mm to dual quarter-inch, or 3.5 mm to RCA.
Other Boutiques. Mini-jack output is a Boutique trait rather than a quirk of this one machine, and the SE-02 shares it, so one adaptor lead, and one spare, covers the lot.
USB. The TR-08 cannot send audio to the mixer over USB. A club mixer is a USB device and not a host. Roland: the audio "will not be processed via USB. You must connect the analog outputs from the drum machine into the audio inputs of your DJ mixer." On this machine the USB port is for a computer and for power.
Output level
Short answer. Output level: N/A.
At soundcheck. The mixer meters are the only guide. A mini jack into a line input is where people push the channel gain and get noise instead of level, so set it before the room is full, not on the first drop.
Sync: MIDI and USB clock
Short answer. The TR-08 has MIDI IN and MIDI OUT connectors, and can follow an external MIDI clock from firmware 1.07.
Firmware 1.07. Version 1.07, January 2019, added USB and MIDI as clock sources and made soft thru switchable. Below that, a machine offers fewer options than the current manual describes, which wastes time in a booth.
Serato. The same release added support for Serato DJ Pro 2.1.1 and later for synchronised playback. Roland's standing caution applies: a Roland DJ controller is not what drives this.
Power
Short answer. The TR-08 runs on four AA cells, rechargeable Ni-MH or alkaline, or USB bus power at 500 mA. Roland quote about six hours of continuous use on rechargeables, with the usual caveat that it depends on the cells and the conditions.
Batteries. When the cells run out it stops without warning.
No mains needed. A USB power bank runs it with no mains at all, which is the point of the format.
What the computer needs
Short answer. The TR-08 has a micro USB type B port that carries audio and MIDI, and it needs Roland's own driver, with builds reaching back to macOS 10.13 and older Windows versions.
Update cable. The update procedure needs a real micro USB data cable, and Roland's instructions say plainly that dedicated charging cables cannot be used.
Windows 10. Roland publish a support article specifically about the driver not installing automatically on Windows 10. Read it before installing on a Windows 10 machine.
What to watch for
TR-08 and the original TR-808
Short answer. The TR-08 is its own machine, with its own connectors, its own power arrangement and its own firmware.
Why it matters. Anything you read about an original TR-808, including its outputs and its sync, describes different hardware. Advice carried across from one to the other is how somebody arrives with the wrong cable.
What they share. The sound and the layout. That is why the machine is in a booth at all.
Professional tips
Before the gig
Pack the adaptor lead with the machine, not separately. The lead is described under Audio output and cable, and it is not something to borrow at a venue.
Carry charged cells and the USB lead. If one power route fails, the other keeps it playing.
Read the dated entries, not the version number. Two of this machine's releases, 1.06 and 1.08, state only that the number was updated for production or management reasons and that specifications are unaffected. The functional change is 1.07.
Firmware, drivers and manuals
Official downloads and documents
Go to Roland for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.
The driver is a separate download from the system program. Updating needs a data cable, as described under What the computer needs.
Firmware downloads. Official Roland firmware page →
Manuals. Official Roland manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- What cable do I need to plug a TR-08 into a club mixer?
- 3.5 mm to dual quarter-inch, or 3.5 mm to RCA.
- Can I plug it into the mixer's USB port?
- No. Its sound reaches the mixer only through the analogue OUTPUT jack.
- Does it run on batteries?
- Yes, and on USB power when the cells are flat.
- What output level does it run at?
- N/A. Use the mixer meters at soundcheck.
- Does it have MIDI?
- Yes, MIDI IN and MIDI OUT.
- Which version should it be on?
- 1.07 or later. The release after it, 1.08, changed only the version number.
- Why will my TR-08 not update?
- Usually a charge-only cable in place of a data cable.
- Is it the same as a TR-808?
- No. It is a reissue with its own hardware; only the sound and layout carry over.
- Do I need a driver on the computer?
- Yes, a separate download from Roland.
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Roland's own TR-08 specification and product pages, its announcement of 8 August 2017 and its published update history to version 1.08, checked 16 October 2026. Specifications theirs, priorities ours.