Booth briefing. The TR-1000 is a drum machine in Roland's TR line, the family that began with the TR-808 and TR-909. Released in 2025, it is the first Roland drum machine in over 40 years with true analogue voices: 16 circuits from the 808 and 909, alongside circuit-bent ACB models, FM percussion, a PCM library and a stereo sampler. Roland built it for producers and performers working in the studio, in hybrid live setups and with modular rigs.
Fast Lane
TR-1000: equipment profile
Roland's 2025 drum machine, with an individual out per instrument, a CV and DIN SYNC block and a USB-A port for a flash drive.
- What comes out
- MIX OUT: quarter-inch pair. ANALOG FX OUT: quarter-inch pair. Individual outs BD to RC, which double as trigger outputs. PHONES: stereo quarter-inch.
- Output level
- N/A.
- Staying in time
- Sync: MIDI, DIN SYNC and CV, with trigger and clock jacks.
- Computer and driver
- USB-C for audio and MIDI, with Roland's driver. USB type A for a flash drive of up to 64 GB.
- Power
- AC IN, 117 to 240 V, 38 W, power cord supplied. No battery and no bus power. 0.2 W in automatic off mode.
- Dimensions and weight
- 48.6 cm wide, 31.1 deep, 12.5 tall (19.1 × 12.2 × 4.9 in). 5.5 kg / 12.1 lb.
- Released
- 2025
Roland's own pages for this model.
TR-1000: five things to know
The TR-1000 in five points, each linked to its section.
The mixer's USB port will not carry its sound.
Roland is explicit: the audio goes through the analogue outputs only.
It is mains only.
There is nothing to fall back on if the socket fails.
Below system version 1.14 its clock output does not follow its own sequencer.
If other machines follow the TR-1000, run 1.14 or later.
Output level: N/A.
Do not assume it matches a line source.
Official equipment video
Note: This feature requires an internet connection.
Connections and setup
Audio outputs
Short answer. The TR-1000 uses quarter-inch jacks throughout: MIX OUT on a left/mono and right pair, a separate ANALOG FX OUT pair, and individual outs for every instrument from BD to RC that double as trigger outputs. Headphones on a stereo quarter-inch.
In the booth. Nothing in the audio path is a mini jack, so the cables a venue already has will fit. The TR-08, by comparison, has one 3.5 mm socket for its entire audio output.
USB. The TR-1000 cannot send audio to the mixer over USB. A club mixer is a USB device, not a host. Roland: the audio "will not be processed via USB. You must connect the analog outputs from the drum machine into the audio inputs of your DJ mixer."
Also on the panel. A stereo EXTERNAL IN pair, plus the PEDAL jack and the USB type A port covered under Before the gig.
Output level
Short answer. Output level: N/A.
At soundcheck. Set the channel by ear against the booth and on the mixer's meters, not on the first drop.
Sync: MIDI, DIN SYNC and CV
Short answer. The TR-1000 has three sync protocols on one panel: MIDI, DIN SYNC and CV.
Jacks. MIDI IN, MIDI OUT1 which doubles as DIN SYNC1, and MIDI OUT2/THRU as DIN SYNC2. A TRIGGER/CV block carries trigger in, trigger out, filter CV in and a clock out, all on mini jacks.
DIN SYNC. It is how the TR-1000 syncs with older Roland gear that predates MIDI.
CLK OUT and firmware. Below 1.14, a machine clocking others can send a pulse that does not match what you are hearing, which is the hardest kind of fault to attribute because it looks like the other machine's problem. The fixes are listed under Firmware.
Power
Short answer. The TR-1000 is mains only: an AC IN socket taking 117 to 240 V and drawing 38 W, with the power cord supplied. No adaptor brick, no battery option, no USB bus power.
Ask the venue. Every other TR runs from an adaptor or from batteries. The TR-1000 needs a wall socket within reach of the table.
When it looks dead. It drops to 0.2 W in its automatic off mode. A machine that looks off between soundcheck and doors is usually that rather than a fault.
What to watch for
Firmware
Short answer. Roland publish a dense update history for the TR-1000, and most of it is new sounds and parameters. A few entries are faults a performer would notice.
1.11, October 2025. Problems during pattern chain and in Song Mode were fixed, and the delay when syncing with an external device was improved.
1.13, November 2025. Roland list several MIDI and DIN SYNC synchronisation fixes in this release without naming the symptoms. If you are locking this machine to anything else, it is the first of two releases that matter.
1.14, December 2025. The release that matters most if other machines follow the TR-1000: it fixed CLK OUT not being synchronised with the sequencer. The same release fixed MIDI note-on delays, MIDI notes not being output when using SLICE, and note-off messages not being sent during INST PLAY.
1.15, January 2026. "Fixed an issue where sound would not be heard under certain conditions." Roland do not say which conditions.
1.20, May 2026. Sounds, effect types and a MIDI MODE that assigns each track its own MIDI channel, plus more headroom: AMP GAIN to 24.0 dB and Mix Out Gain to +18 dB. No fault fixes in it.
1.50, October 2026. A large free release, again with no fault fixes: a note-sequencing step mode, a keyboard-play mode across the x0x triggers for bass and melodic parts, 50 FM instruments carried over from the TR-8S, four new MFX effects, and a "keep EFX and EXT in" option that holds active effects and external inputs running across a kit or pattern switch mid-set.
Read the entries, not the number. Three releases in this machine's history, 1.16, 1.21 and 1.22, state only that the version number was updated for management reasons and that product specifications are unaffected. There is no 1.12 at all. A high number is not by itself evidence that anything was fixed.
Professional tips
Before the gig
USB stick. The TR-1000 reads a flash drive of up to 64 GB on a second USB port of type A, which no other TR does. Roland cannot guarantee every commercially available drive will work, so test the one you intend to use.
Pedal. A PEDAL (CONTROL) jack, with Roland naming the FS-5U and FS-6 switches and the EV-5 expression pedal as options.
Measure the table before you arrive. 486 mm wide, 311 deep, 125 tall, 5.5 kg. Check the depth as well as the width.
Firmware, drivers and manuals
Official downloads and documents
Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.
The TR-1000 USB-C port carries audio and MIDI to a computer. It needs Roland's driver, a separate download from the system program: version 1.0.0 for Windows 10 and 11, and 1.0.1 for macOS Ventura or later.
Firmware downloads. Official Roland firmware page →
Manuals. Official Roland manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- Can I plug the TR-1000 into the mixer's USB port?
- No. Its sound reaches the mixer only through the analogue outputs.
- What connectors does it use?
- Quarter-inch for all the audio, mini jacks for the TRIGGER/CV block.
- Does it run on batteries?
- No. It is mains only.
- Does it have CV and DIN SYNC?
- Yes, both. CV sits on the TRIGGER/CV block and DIN SYNC shares the MIDI OUT jacks.
- What output level does it run at?
- N/A. Use the mixer meters.
- Can it read a USB stick?
- Yes, up to 64 GB, on the type A port.
- Which system version should it be on?
- 1.14 or later if anything else follows its clock.
- Do I need a driver on the computer?
- Yes, Roland's own, with separate builds for Windows and macOS.
- How big is it?
- Just under half a metre wide, and 5.5 kg.
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Roland's TR-1000 specification page, its announcement of 1 October 2025 and update history to version 1.50, checked 22 October 2026. Specifications theirs, priorities ours.