Booth briefing. MASCHINE MIKRO is the compact controller in Native Instruments' MASCHINE production line, alongside the full-size MASCHINE and the standalone MASCHINE+. It controls the same MASCHINE 3 software, as an application or as a plug-in inside a DAW, and does nothing without a computer. It has 16 velocity-sensitive pads and the same Smart Strip as the larger models, with one compact screen and one encoder in place of their displays and knobs. It is about half the weight of the MK3 and has no audio interface of its own, so the sound comes out of the computer.
Fast Lane
MASCHINE MIKRO (MK3): equipment profile
The compact controller in the MASCHINE line: 16 pads, one screen and one encoder, for use with the MASCHINE 3 software.
- Without a computer
- No. It needs a computer.
- Software
- MASCHINE 3, with Komplete Select and a 7 GB Maschine Central library.
- Ports
- No audio interface, MIDI ports or footswitch input.
- Power
- USB 2.0 bus power.
- Released
- 2017
The five things that decide your gig
MASCHINE MIKRO in five points, each linked to its section.
It cannot run without a computer.
Bring the laptop: nothing plays from the unit alone.
No audio, MIDI or footswitch connections.
Decide how you will record before you leave home.
Smaller than the MK3, at half the weight.
It is built for the bag, not the studio mixer.
No firmware history or fault record found.
So there is no minimum version to check.
Registration unlocks more than the software.
Check what it unlocks before buying another synth.
Official equipment video
Note: This feature requires an internet connection.
Connections and setup
Does it run without a computer
Short answer. No, and Native Instruments say so directly: their own FAQ states that MIKRO cannot be used without a computer.
It works two ways, both needing a host. As a hardware controller for the MASCHINE 3 software, or as a VST, Audio Unit or AAX plug-in loaded inside a DAW. No mode lets the unit produce sound on its own.
Activation needs the internet once. MASCHINE 3 is downloaded and licensed through Native Access, which needs a connection the first time, then runs offline.
Neither MIKRO nor the full-size MK3 is standalone. The genuinely standalone unit in this line is MASCHINE+, which has its own processor and storage and does not need a computer at all.
What it does and does not carry
Short answer. No built-in audio interface, no MIDI ports and no footswitch input, all three of which the other MASCHINE units carry.
What it carries instead. 16 velocity-sensitive, multi-colour pads described as large and highly sensitive; one compact screen (against the MK3's two high-resolution colour displays); one multi-function push encoder (against the MK3's eight touch-sensitive knobs plus a 4-directional encoder); and one dual-touch Smart Strip, the same control the MK3 and MASCHINE+ both carry.
Recording. With no audio path of its own, MIKRO records through a dedicated audio interface or the computer's built-in sound card.
What to watch for
How it compares to the MK3
Short answer. 320 x 177 x 45 mm (W x D x H), 1.12 kg: the same width as the MK3's 320 x 301 x 41 mm, shorter in depth and height, and half the weight.
USB 2.0 bus-powered, no external power supply. One cable does power and control.
The library is smaller too. Komplete Select plus a 7 GB Maschine Central library, per Native Instruments' own comparison chart against the MK3.
Shared software. Registering MASCHINE MIKRO unlocks full versions of Massive, Monark and Reaktor Prism through Native Access, the same as on the MK3 and MASCHINE+.
Professional tips
Worth knowing before the gig
Plan the audio route. Whatever records the pads has to be packed too; the options are under What it does and does not carry.
Activate MASCHINE 3 at home. Do it on a known network, not at the venue.
Check which rig has the interface. A producer who moves between MIKRO and the MK3 has an audio interface on one and not on the other.
Firmware, drivers and manuals
Official downloads and documents
Go to Native Instruments for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.
No firmware version, change history or updater could be reached for MASCHINE MIKRO, so none is linked here, and no recall or service notice was found for it either.
Manuals. Official Native Instruments manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- Can MASCHINE MIKRO be used without a computer?
- No. Both ways of using it need a host computer.
- Does it have a built-in audio interface?
- No.
- How do I record its pads, then?
- Via an external interface or sound card.
- How does it compare in size to the MK3?
- Same width, much shorter front to back.
- How is it powered?
- Over USB, from the computer.
- What software does it run?
- MASCHINE 3, as on the MK3 and MASCHINE+.
- Is there a published firmware version for MIKRO?
- None found.
- What is the real standalone MASCHINE?
- MASCHINE+.
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Native Instruments All brands Knowledge base FAQ and Fixes Dictionary
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Native Instruments' own MASCHINE MIKRO product page and its comparison chart against the MK3, checked 22 October 2026. Specifications theirs, priorities ours.