Released 2013 Reviewed: 14 November 2026

HandSonic HPD-20, field manual

Roland HandSonic HPD-20 digital hand percussion, top view

Booth briefing. The HandSonic HPD-20 is Roland's digital hand percussion: 13 pressure-sensitive pads on a 10-inch surface, played with the fingers and palms rather than sticks, with 850 instruments and 200 kits on board. Roland built it for stage and studio, and its 2013 announcement names electronic dance music performers among the people it is for. It is played live rather than programmed: there is no pattern sequencer, only a realtime recorder. Next to a mixer it is one stereo source on quarter-inch jacks, powered by its AC adaptor.

Fast Lane

HandSonic HPD-20: equipment profile

A percussion pad played by hand, for stage and studio, on mains power only.

Plays
850 instruments and 200 kits, with up to 500 imported WAV samples. D-BEAM and a Realtime Modify knob.
What comes out
OUTPUT L/MONO and R on quarter-inch jacks, PHONES on a stereo quarter-inch jack, MIX IN on a stereo quarter-inch jack.
Output level
N/A. A System Gain setting moves the OUTPUT, PHONES and USB audio level.
Staying in time
MIDI IN and MIDI OUT on five-pin DIN, and MIDI over USB. TRIG IN, HH CTRL and FOOT SW inputs.
Computer and driver
USB COMPUTER (Type B) for audio and MIDI, with Roland’s driver. USB MEMORY (Type A) for a flash drive.
Power
The included AC adaptor only, 700 mA. No batteries. 2.4 kg without the adaptor.
Dimensions and weight
31.1 cm wide, 40.4 deep, 10.2 tall (12.2 × 15.9 × 4 in). 2.4 kg / 5.3 lb.
Released
2013

Specifications and update history as Roland publishes them.

HandSonic HPD-20: five things to know

The HandSonic HPD-20 in five points, each linked to its section.

It switches itself off after 20 minutes untouched.

Roland changed the default in an update.

Auto Off

Mains power only, from the included AC adaptor.

There is no battery option.

Power, weight and size

Quarter-inch outputs: a normal line pair for the mixer.

No adaptor lead needed, unlike a Boutique.

Audio connections

No sound with the screen alive usually means Local Control.

It must be ON to hear the pads.

MIDI, pedals and triggers

Never plug or pull the USB flash drive with the power on.

Roland warn it can corrupt the data.

What the computer needs

Official equipment video

Note: This feature requires an internet connection.

Connections and setup

Pads and sounds

Short answer. Hands on the pads, no sticks: 850 instruments across 200 kits.

What Roland call it. Digital hand percussion. It is filed with the drum machines on this hub because it makes drum and percussion sounds, but it works differently: it has no pattern sequencer to lock to a clock. Quick Rec records what you play in real time.

Your own sounds. Up to 500 user instruments imported as WAV files (44.1 kHz, 16-bit), up to 12 minutes in mono or 6 in stereo in total.

Controls beyond the pads. D-BEAM, a Realtime Modify knob and a ROLL button. Roland's manual notes that the D-BEAM's usable range becomes extremely small under strong direct sunlight, which matters at a daytime outdoor gig.

Kit chains. 15 chains of up to 50 steps let a set of kits be stepped through in order during a performance.

Audio connections

Short answer. OUTPUT L/MONO and R on quarter-inch jacks, PHONES on a stereo quarter-inch jack, and MIX IN on a stereo quarter-inch jack.

A normal line pair. Two quarter-inch cables reach any club mixer's line inputs. For one channel only, use L/MONO.

Two volume knobs. VOLUME sets the OUTPUT jacks, PHONES sets the headphones. Turning down your headphones does not change what the mixer receives.

System Gain. A setting that raises or lowers the level of the OUTPUT jacks, PHONES and USB audio together. Output level in dBu: N/A. Set the channel gain at soundcheck.

MIX IN. A phone or another source plugged in here comes out of the HandSonic's outputs. If the pads sound but that source does not, check its own volume first.

MIDI, pedals and triggers

Short answer. MIDI IN and MIDI OUT on five-pin DIN, MIDI over USB, and TRIG IN, HH CTRL and FOOT SW inputs on quarter-inch TRS jacks.

Channel 10 by default. The pads send and receive on MIDI channel 10 unless changed. A device on another channel stays silent.

Local Control. With Local Control OFF the pads play only over MIDI and the HandSonic makes no sound of its own. Roland's troubleshooting table lists it among the first checks.

Expansion. TRIG IN takes an extra Roland pad or kick, HH CTRL a hi-hat control pedal and FOOT SW a footswitch, so it can become a compact kit.

What the computer needs

Short answer. USB COMPUTER is a Type B port carrying audio and MIDI, with Roland's own driver. USB MEMORY is a Type A port for a flash drive.

The driver. Roland publish it to 1.0.6 for macOS Sonoma 14 or later and 1.0.1 for Windows 10 and 11, with older builds back to Mac OS 10.6.8.

Flash drives. Roland recommend their own flash memory and publish a list of other drives that can be used. Format the drive on the HandSonic, and put files to import at the top level.

Two warnings from the manual. Never insert or remove a flash drive while the unit is on, and do not strike the pads while the drive is being read or written: the vibration can cause errors.

Power, weight and size

Short answer. The included AC adaptor only, drawing 700 mA. There are no batteries and no USB power.

Use the cord hook. The rear panel has one for the adaptor cable. A pulled adaptor is silence until it boots again.

2.4 kg, without the adaptor. 311 mm wide, 404 mm deep and 102 mm tall. Roland sell a dedicated carrying bag, the CB-HPD, and a pad stand, the PDS-10.

What to watch for

Auto Off

Short answer. Since system program 1.04 the HPD-20 switches itself off by default after 20 minutes without being played or touched.

Why it matters in a booth. A DJ adding percussion can easily go twenty minutes without a strike. The unit then turns off, and turning it back on takes a power cycle.

The manual says 4 hours. The owner's manual describes the earlier factory setting of 4 hours. The 1.04 update note changed the default; a message appears on screen about five minutes before power off.

The fix. Set Auto Off to OFF in the system settings before the gig.

Firmware

Short answer. Version 1.04 is the highest published system program for the HPD-20, and neither listed release names a defect.

What changed. 1.04 changed the default Auto Off time to 20 minutes. 1.03 renamed some kits and instruments, with the sounds unchanged; Roland publish the current Sound List.

Known issues. None known. Updating mid-tour is not needed for stability, but know which Auto Off default your unit is on.

Never power it off during an update. Roland warn that an interrupted update needs a service centre to recover.

Professional tips

Before the gig

Turn Auto Off to OFF. Do it at home, not at soundcheck.

Pack two quarter-inch cables and the adaptor. Hook the adaptor cable on the rear panel.

Back up to a flash drive. Save Backup stores all settings, with your imported sounds if you choose.

Firmware, drivers and manuals

Official downloads and documents

Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.

Roland publish the Owner's Manual, a MIDI Implementation, a Patch List and a list of usable flash drives for the HPD-20.

Frequently asked questions

Quick answers

Does the HandSonic HPD-20 run on batteries?
No. Only the included AC adaptor.
Why did it switch off during the set?
Auto Off. Set it to OFF before the gig.
What cables do I need for the mixer?
Two quarter-inch cables from OUTPUT L/MONO and R, or one from L/MONO.
Can it play patterns on its own?
No. It has no pattern sequencer; Quick Rec records what you play.
The screen works but there is no sound. Why?
Check VOLUME, then whether Local Control is OFF.
Can I use any USB flash drive?
Not every drive. Format it on the HandSonic first; Roland name the ones they support.
Which firmware should it be on?
1.04, the highest published. Neither release names a defect.
Is it a drum machine?
Roland call it digital hand percussion. It sits with the drum machines here because of its sounds.

Related drum machines

Commonly paired with

What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.

Roland All brands Knowledge base FAQ and Fixes Dictionary

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Roland's own HandSonic HPD-20 product and specification pages, its announcement of 4 September 2013, the owner's manual and the Updates & Drivers page, checked 14 November 2026. Specifications theirs, priorities ours.