Released 2026 Reviewed: 14 November 2026

n/vision, field manual

Roland n/vision wavetable synthesizer, top view

Booth briefing. The n/vision is a synthesizer in Roland's Boutique series, announced in October 2026 alongside the JUPITER-08. Unlike the rest of the line it recreates no vintage model: it is a newly developed wavetable instrument, with two wavetable layers per part, a wave shaper and an analogue-modelling filter, and it ships with the K-25m keyboard. Up to 56 voices, a two-part 64-step sequencer and an arpeggiator. It has a built-in speaker. Next to a mixer it is one stereo source, synced over MIDI, USB or a clock pulse.

Fast Lane

n/vision: equipment profile

The first Boutique that copies no vintage instrument, keyboard included.

Plays
Up to 56 voices, depending on the sound load. Two wavetable layers per part, two parts, a 64-step sequencer and an arpeggiator.
What comes out
OUTPUT and PHONES, both stereo 3.5 mm, and MIX IN on 3.5 mm. Built-in speaker.
Output level
N/A.
Staying in time
MIDI IN and MIDI OUT on five-pin DIN, and EXT CLOCK IN on a mono mini jack. No CV OUT or GATE OUT.
Computer and driver
USB-C for audio and MIDI to a computer, with Roland’s driver.
Power
Four AA cells or USB bus power (500 mA). About 6 hours on Ni-MH. 1.7 kg with the K-25m and the batteries.
Dimensions and weight
30.8 cm wide, 20.9 deep, 5.4 tall (12.1 × 8.2 × 2.1 in). 1.7 kg / 3.7 lb.
Released
2026

Specifications and update history as Roland publishes them.

n/vision: five things to know

The n/vision in five points, each linked to its section.

Up to 56 voices, and the count moves with the sound.

Some settings cost voices.

Voices and sound

Audio leaves on 3.5 mm sockets, so bring the cable.

Pack it with the synth.

Audio connections

It follows and sends clock.

Set Sync Source rather than leaving it on Auto.

Clock and MIDI

USB-C, and only a data cable works.

A charge-only cable looks identical.

What the computer needs

Its 1.01 notes repeat the JUPITER-08's word for word.

One item names a control it does not have.

Firmware

Official equipment video

Note: This feature requires an internet connection.

Connections and setup

Voices and sound

Short answer. Up to 56 voices, depending on the sound generator load, across two parts.

The count is not fixed. Roland's manual says the Spread function and a -24 dB filter slope both reduce polyphony. A pad that plays cleanly on one patch can steal voices on another.

Engine. Two wavetable layers per part, Roland's wave shaper and an analogue-modelling filter with drive, plus a step LFO and motion recording. Dual and split modes put the two parts on one keyboard.

Sequencer, arpeggiator and effects. A two-part 64-step polyphonic sequencer, an arpeggiator, 17 MFX types, a delay and five reverb types with a shimmer mode. 240 patches and 96 patterns.

The K-25m comes in the box. It is a 25-key dock, so the n/vision is playable out of the box.

Audio connections

Short answer. On the n/vision, OUTPUT and PHONES are both stereo 3.5 mm sockets, and MIX IN is a third.

Cable. Club mixers take quarter-inch or RCA, so bring your own cable: 3.5 mm to dual quarter-inch, or 3.5 mm to RCA. The same lead covers every Boutique on this hub.

Speaker. It has a small built-in speaker for checking a patch on a table. It is not an output: everything that reaches the mixer still leaves on the 3.5 mm socket.

MIX IN. It lets another source share the outputs, which is how two Boutiques reach one mixer channel. A hot source arriving there raises what the mixer receives without the n/vision's own level moving.

Output level: N/A. Set it at soundcheck, and again after changing patch.

Clock and MIDI

Short answer. MIDI IN and MIDI OUT on five-pin DIN, one EXT CLOCK IN on a mono mini jack, and MIDI over USB.

Sync Source. The sequencer follows the clock chosen in the Sync Source setting: Auto, its internal clock, MIDI or USB. Auto picks up whatever arrives, so set it explicitly when two clocks could reach the n/vision at once.

It can send clock too. Sync Out sends MIDI clock from the MIDI connector, the USB port or both, so it can lead another machine rather than only follow one.

EXT CLOCK IN takes a pulse, not MIDI. A drum machine's trigger output or a modular clock steps the sequencer with no MIDI in the chain. There is no CV OUT and no GATE OUT.

What the computer needs

Short answer. The n/vision has a USB-C port carrying audio and MIDI, so one cable to a computer is the whole connection. It needs Roland's own driver, and a real data cable for updating.

A charge-only USB-C cable will not work. Roland's manual says so directly: charge-only cables cannot carry data. It looks identical, and it is the usual reason a computer does not see the unit.

The driver is a separate download from the system program. Roland publish driver 1.0.0 for macOS Sonoma 14 or later and for Windows 11.

USB-C, not micro USB. The older Boutiques on this hub use micro USB, so a bag packed for a JU-06A has the wrong cable.

Power, weight and size

Short answer. The n/vision runs on four AA cells, Ni-MH or alkaline, or USB bus power at 500 mA. There is no DC input on the connector list.

Roland quote about 6 hours on Ni-MH cells of 1,900 mAh, and no alkaline figure. For a long set, a USB battery pack is the route to rely on.

The published 1.7 kg includes the K-25m keyboard and the four batteries. It ships docked, so that is what goes in the bag.

308 mm wide, 209 mm deep, 54 mm tall with the K-25m. The same footprint as the JUPITER-08.

Auto Off is 240 minutes by default. A unit left untouched for four hours switches itself off; Auto Off Minute changes it.

What to watch for

Firmware

Short answer. Version 1.01 of October 2026 is the only update.

Read its notes with care. Roland's 1.01 notes for the n/vision repeat the JUPITER-08's word for word, on its global, US, UK and Japanese pages alike. Three items name things the n/vision manual also describes: the arpeggiator with Mode set to rnd and Oct to 2, the arpeggiator in Split mode, and the POLY setting not being applied. The fourth, a VCO-2 Range setting, appears nowhere in the n/vision reference manual.

Check the display. The version shows on the unit's display. Update to 1.01 before relying on the POLY setting or the arpeggiator in Split mode.

Never compare Roland version numbers across models. A 1.01 here and a 1.01 on another Roland box are unrelated.

Professional tips

Before the gig

Pack the 3.5 mm audio cable and a spare. No venue has one for a Boutique.

Label the USB-C data cable that works. Keep it in the bag with the machine.

Fresh Ni-MH cells or a USB battery pack. The battery figure is Roland's, and it is for Ni-MH only.

Firmware, drivers and manuals

Official downloads and documents

Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.

Roland publish a Reference Manual and a Quick Start for the n/vision.

Frequently asked questions

Quick answers

How many voices does the n/vision have?
56 at most; fewer with Spread on.
Is it a reissue of an old Roland?
No. Roland describe it as a newly developed instrument for the Boutique series.
Does it come with a keyboard?
Yes, the K-25m keyboard dock is in the box.
What cable do I need for the house system?
3.5 mm to dual quarter-inch or 3.5 mm to RCA, whichever the mixer inputs take.
Can it send MIDI clock?
Yes, over five-pin MIDI, USB or both.
Which firmware should it be on?
1.01, the only update Roland list.
How long does it run on batteries?
Roughly six hours on Ni-MH, by Roland's figure.
Why does the computer not see it?
Usually a charge-only USB-C cable. Use a data cable.

Related synthesizers

Commonly paired with

What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.

Roland All brands Knowledge base FAQ and Fixes Dictionary

Playing soon and it is not working?

Start Emergency Mode

Keep the Emergency Card

We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.

Register and receive it

Sources: Roland's own n/vision product and specification pages, the reference manual and the Updates & Drivers page, checked 14 November 2026. Specifications theirs, priorities ours.