Booth briefing. The DJ-505 is a two-channel, four-deck DJ controller for Serato DJ Pro in Roland's family of Serato controllers, with a TR drum machine built in: kits from the TR-909, TR-808, TR-707 and TR-606, played on the pads or from a 16-step sequencer that syncs to the Serato tracks. Roland groups it with the DJ-808 and the DJ-202 and built it for DJs who also make beats, transitions and live remixes. Its mixer also works on its own with turntables or media players, and it is ready for a Serato DVS upgrade. A Serato Tool Kit license comes with it.
When it goes wrong: The computer cannot see the controller No sound from the controller
Fast Lane
DJ-505: equipment profile
Roland's Serato DJ controller with a TR drum machine built in, balanced and booth outputs, and phono-capable inputs.
- Software
- Serato DJ Pro.
- What it unlocks
- TR-S section: sixteen pads, kit select, kit copy, Step Loop. Cannot drive a TR-8S.
- Without a computer
- No music without a computer. The mixer inputs still work.
- Sound out
- XLR +6 dBu, RCA +0 dBu, booth TRS +6 dBu. Headphones: quarter-inch and mini jack.
- Power
- Supplied AC adaptor, 2,000 mA. Not bus-powered. Auto Off defaults to 20 minutes.
- What the computer needs
- One PC port, USB type B. Roland driver required. MIDI OUT.
- Dimensions and weight
- 53 cm wide, 40.2 deep, 7.3 tall (20.9 × 15.8 × 2.9 in). 3.5 kg / 7.7 lb.
- Released
- 2017
Roland's own DJ-505 specification page, the owner's manual and the update history to ver. 1.14.
DJ-505: five things to know
The DJ-505 in five points, each linked to its section.
A TR drum machine inside, the reason to choose it.
The pads play the unit's own section, not an outboard machine.
By default it switches itself off after 20 minutes.
The setting to change first.
Balanced XLR and booth outputs, with published levels.
A venue can take a balanced feed from it.
Turntables work, with a ground post.
The next DJ can plug in on a spare channel.
Below firmware 1.11 the drum section fails with current Serato.
On a used unit, check the version first.
Official equipment video
Note: This feature requires an internet connection.
Connections and setup
The drum machine inside
Short answer. The TR-S is one of the five sections of the top panel, alongside browser, deck, mixer and effects. Sixteen pads, a VALUE knob, a SHUFFLE button, kit select and kit copy, and its own output level and cue controls in the mixer section.
Sync and effects. The TR-S tempo synchronises with the Serato tempo, and FX 1 and FX 2 can be applied to the TR-S and sampler path. So the drums sit inside the mix rather than beside it.
Firmware 1.10. January 2018 added the Step Loop function, TR kit select, kit copy and performance-pad sensitivity, and expanded the Low Tom instruments.
TR-8S. The TR-S is not a TR-8S and it cannot control one. Roland name the DJ-202, DJ-505 and DJ-808 as unable to act as the TR-8S's DJ controller. If you own both, they are two separate instruments on the table.
Outputs and levels
Short answer. MASTER OUT 1 on balanced XLR at +6 dBu, MASTER OUT 2 on RCA at +0 dBu, and BOOTH OUT on balanced TRS at +6 dBu. Headphones take both a quarter-inch and a mini jack.
Levels. Roland publishes all three, which is rare for the brand. You can set the house channel from the number at soundcheck instead of guessing.
House feed. Use the balanced XLR for the room. It rejects the noise a long cable run picks up, which the DJ-202's RCA-only master cannot do. Keep MASTER OUT 2 for a recorder or a second zone.
Booth. The booth feed is separate and has its own level. So the monitor is independent of what the room hears, which on a long set is the difference between protecting your ears and not.
What you can plug into it
Short answer. INPUT 1 and INPUT 2 on RCA, both accepting phono level from an MM cartridge, with a PHONO GROUND terminal. MIC IN on a quarter-inch jack. Those channels work as mixer channels.
Ground post. If a turntable is on CH 1 or CH 2, its earth wire goes to the PHONO GROUND terminal. Without it you get hum, and the hum sounds like a fault in the unit rather than a missing wire.
Changeover. The next DJ's source goes on a spare channel while yours is still playing, which on a controller with no inputs means silence instead.
Source switch. Each channel selects between PHONO, line level and the computer, so a channel set to the wrong source is silent with everything correctly plugged in.
What the computer needs
Short answer. One PC port on USB type B, Roland's own driver, and Serato DJ Pro, which Roland confirmed in March 2018.
USB type B. The older square connector. A laptop with only USB-C needs an adaptor or a B-to-C cable, and that is not in the box.
Driver. A separate download from the system program. Roland publish versions to 1.0.6 for macOS Sonoma 14 or later and 1.0.2 for Windows 10 and 11. A unit the software sees but that makes no sound is usually the driver.
MIDI OUT. There is also a MIDI OUT connector. Useful for clocking an external drum machine from the booth, which is a different job from the TR-S inside.
Power and Auto Off
Short answer. The supplied AC adaptor, drawing 2,000 mA. It is not bus-powered, so a unit that will not come on is the adaptor and never the laptop cable.
Auto Off. From firmware 1.13 of March 2025 the unit powers itself down after 20 minutes without playback or a control being touched. Roland's own manual says how to disable it, and on a working gig you should.
What it looks like. A controller that has switched itself off presents as a controller that has died: no lights, no audio, nothing on the laptop. Someone who does not know the setting exists will spend that break swapping cables.
Weight. 3.5 kg plus the adaptor. Heavier than it looks, and the brick is not optional, so the bag has to hold both.
What to watch for
The one fault Roland names
Short answer. One named fault on the DJ-505 in eight years, and it is the drum section rather than the controller.
1.11, July 2019. The TR-S failed to work correctly with Serato DJ Pro 2.1.1 and later. The DJ-202 carries the same fault, fixed the same month at the same version number, which is rare for Roland: their version numbers almost never line up across models.
1.13, March 2025. Not a fault, and it matters more: see Power and Auto Off.
Other releases. 1.14 of November 2025 says only that minor bugs were fixed. 1.12 is a version-number change Roland attributes to management circumstances.
Professional tips
Before the gig
Turn Auto Off off at setup, not when it bites. It is in the system settings, it takes a few seconds, and it is the difference between a break and a panic.
Use MASTER OUT 1 into the house and keep MASTER OUT 2 free. The reasons are under Outputs and levels.
Label which channel is set to PHONO. The source switch is the first thing to check on a silent channel.
Firmware, drivers and manuals
Official downloads and documents
Go to Roland for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.
The system program and the driver are separate downloads, and the version of record is 1.14. Roland also publish the owner's manual in eight languages and the Startup Guide in seven.
Firmware downloads. Official Roland firmware page →
Manuals. Official Roland manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- My DJ-505 turned itself off during the break. Why?
- Auto Off, which defaults to 20 minutes.
- Can I connect a turntable?
- Yes, on either of the first two inputs, with the earth wire on the ground terminal.
- What are the output levels?
- Two balanced outputs at +6 dBu and one RCA at +0 dBu.
- Does it have a booth output?
- Yes, on balanced TRS, separate from the master feed.
- Does it run on USB power?
- No. It needs its AC adaptor.
- Will it play without a computer?
- No music, but a turntable or microphone still reaches the mixer.
- Can the TR-S control my TR-8S?
- No. Roland names the DJ-505 as unable to do that.
- Which firmware should it be on?
- 1.11 or later. The version of record is 1.14.
- Which software does it use?
- Serato DJ Pro.
- How heavy is it?
- 3.5 kg, before the adaptor.
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Roland's product pages and owner's manual for the DJ-505, and its published update history, checked 16 October 2026. Specifications theirs, priorities ours.