Booth briefing. The VP-03 is a vocoder in Roland's Boutique series, a miniature version of the VP-330 Vocoder Plus. It keeps the sound and interface of the original and adds a Voice Step Sequencer and Chord Memory. You speak or sing into the microphone and your voice shapes the onboard synthesised sounds, with vocoder, human voice and string sources, and each of the 16 steps can hold a note, a chord or your voice. For a DJ it is a way to play your own voice as an instrument inside a live set.
Fast Lane
VP-03: equipment profile
A Boutique vocoder with a neck-worn TMIC input and a sampling function.
- Output level
- N/A.
- Staying in time
- MIDI IN and MIDI OUT on five-pin DIN, plus MIDI over USB.
- Computer and driver
- USB Micro-B for audio and MIDI to a computer, with Roland’s driver.
- Power
- Four AA cells or USB bus power (500 mA). About 6 hours on Ni-MH. 940 g including the batteries.
- Dimensions and weight
- 30 cm wide, 12.8 deep, 4.6 tall (11.8 × 5 × 1.8 in). 0.94 kg / 2.1 lb.
- Released
- 2016
Specifications and update history as Roland publishes them.
VP-03: five things to know
The VP-03 in five points, each linked to its section.
The microphone input is XLR and the audio output is 3.5 mm.
You need a microphone lead and an output lead.
MIDI runs both ways, which the VT-4 cannot do.
It can sit inside a sequenced rig, not only at the end of one.
It runs on cells or USB, with no DC input.
There is nowhere to plug in a mains adaptor.
No defect on record, and only two releases.
The only added features are for sampling, in 1.04.
Updating needs a micro USB data cable.
The version check is a light pattern, not a screen.
Official equipment video
Note: This feature requires an internet connection.
Connections and setup
Microphone input and audio output
Short answer. The VP-03 has TMIC IN on an XLR jack, OUTPUT on a stereo 3.5 mm socket and PHONES on another.
Cables. Pack two. The microphone input is a full-size XLR, so the first is a microphone lead that ends in XLR. The audio output is a 3.5 mm mini jack, and club mixers take quarter-inch or RCA, so bring your own cable: 3.5 mm to dual quarter-inch, or 3.5 mm to RCA. The SH-01A, TB-03 and SE-02 need the same one.
TMIC. TMIC is the neck-worn microphone the VP-03 was designed around. It leaves both hands free, which on a vocoder matters more than usual: one hand is playing the carrier and the other is on the controls.
Output level. N/A. Set it at soundcheck with the vocoder running and a voice in the microphone, because an unvoiced carrier and a sung phrase do not arrive at the mixer at the same level.
Clock and MIDI
Short answer. The VP-03 has MIDI IN and MIDI OUT on five-pin DIN, plus MIDI over USB.
Compared with the VT-4. The VT-4 has MIDI IN only: it can be played and it plays nothing. The VP-03 can be driven by a keyboard or a sequencer and can send on what it receives.
MIDI input. On a vocoder the MIDI input is the instrument. The notes arriving are the carrier the voice is shaped onto, so a dropped or wrong-channel MIDI stream is not a loss of control, it is a loss of sound.
Cable. The ordinary five-pin lead. No adaptors, unlike the SP-404MKII's mini-jack MIDI.
Computer, driver and updates
Short answer. The VP-03 has a USB Micro-B port carrying audio and MIDI. It needs Roland's own driver, and a real data cable for updating.
Update cable. Roland state that dedicated charging cables cannot be used. A micro USB lead that carries only power looks identical to one that carries data, and it is the usual reason an update refuses to start. It presents as a dead port.
Version check. Hold button 1 while switching on, then read which indicators light: buttons 8, 14 and 15 lit means the machine is at 1.06. Anything else means it is not. Power off without pressing anything else.
Driver. The driver is a separate download from the system program. Roland publish it to 1.0.7 for macOS 12 and 1.0.1 for Windows 10 and 11.
Power and weight
Short answer. The VP-03 runs on four AA cells, Ni-MH or alkaline, or USB bus power at 500 mA. There is no DC input.
Battery life. Roland quote about 6 hours on Ni-MH cells and give no alkaline figure for this machine, so plan with the one that exists and treat alkalines as shorter.
Use a USB battery pack. 500 mA is undemanding, and there is no mains option to fall back on.
Weight and size. The published 940 g includes the batteries. 300 mm wide, 128 mm deep, 46 mm tall, the same chassis as the SH-01A and the SE-02, so one case fits all three.
What to watch for
Firmware
Short answer. The VP-03 has two releases, and neither is a fix to chase. The last release is 1.06.
1.06, January 2019. Roland describe it as a version-number change made for production-related circumstances, with product specifications unaffected.
1.04, November 2016. Added an adjustment for the sampling threshold, and a pre-sampling time setting. Both are about the machine's sampling function rather than its vocoder, and a unit below 1.04 cannot set either.
Sampling settings. The threshold decides when a capture starts and the pre-sampling time decides how much of what came before it keeps. Together they are the difference between catching a word and catching only the second half of it.
Professional tips
Before the gig
Carry a USB battery pack. The reasons are under Power and weight.
Label the micro USB cable that works. Keep it with the machine.
Check the level with a real voice, not a test tone. The reasoning is under Microphone input and audio output.
Firmware, drivers and manuals
Official downloads and documents
Manuals, drivers and the system program are on Roland's site. The links below go to Roland's own pages, which stay up to date.
The download page carries the system program and seven drivers. The machine is discontinued, so 1.06 is permanent.
Firmware downloads. Official Roland firmware page →
Manuals. Official Roland manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- What microphone does the VP-03 take?
- The neck-worn TMIC, on an XLR input.
- What cable do I need for the house system?
- 3.5 mm to dual quarter-inch or 3.5 mm to RCA for the output, plus an XLR lead for the microphone.
- Can it send MIDI to my other gear?
- Yes, through the five-pin MIDI OUT.
- Does it run on mains?
- No. It has no DC input, so cells or USB are the only supplies.
- How long does it run on batteries?
- About 6 hours on Ni-MH cells. Alkaline: N/A.
- Which firmware should it be on?
- 1.06, the last release. Only 1.04 changed what the machine can do.
- Are there any known faults?
- None that Roland has named.
- Why will the update not start?
- Usually the cable: it must be a data lead, not a charging one.
- How do I check the version?
- Hold button 1 as you power on and read the lights, because there is no version screen.
- What is the difference between this and the VT-4?
- The VT-4 is a voice transformer, with a combo XLR and TRS input carrying phantom power and a bypass output. The VP-03 is the vocoder, built around the TMIC.
Related vocal processors
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Roland's own VP-03 specification and product pages, its announcement of 9 September 2016, the owner's manual and the published update history to version 1.06, checked 17 October 2026. Specifications theirs, priorities ours.