Booth briefing. The TB-3 is Roland's Touch Bassline, a bass synthesizer based on the TB-303 and one of the first AIRA machines, launched alongside the TR-8. Roland used its ACB modelling to reproduce the 303's saw and square oscillators and ladder filter, and added a pressure-sensitive touch pad for playing and programming. It holds 134 sounds: the original TB-303 tones plus new four-oscillator basses, leads and effects. It is a different machine from the Boutique TB-03, so check which one you have before you plan cables.
Fast Lane
TB-3: equipment profile
The AIRA Touch Bassline: 240 mm wide, with a touch pad, quarter-inch outputs and five-pin MIDI.
- What comes out
- OUT (L/MONO, R): quarter-inch pair. PHONES: stereo quarter-inch. No audio input.
- Output level
- N/A.
- Staying in time
- MIDI IN and MIDI OUT on five-pin DIN, plus MIDI over USB.
- Computer and driver
- USB type B for audio and MIDI, with Roland's driver: 1.0.5 for macOS Sonoma 14 or later and Sequoia 15, 1.0.1 for Windows 10 and 11.
- Power
- AC adaptor or USB bus power (500 mA). 820 g, 240 by 173 mm.
- Dimensions and weight
- 24 cm wide, 17.3 deep, 5.7 tall (9.4 × 6.8 × 2.2 in). 0.82 kg / 1.8 lb.
- Released
- 2014
Roland's own pages for this model.
TB-3: five things to know
The TB-3 in five points, each linked to its section.
This is the TB-3, not the TB-03.
Advice carried over from the TB-03 gets the cable wrong.
The outputs are quarter-inch.
There is no adaptor lead to remember.
MIDI is ordinary five-pin, in and out.
It can lead a small rig or follow one.
Adaptor or USB bus power, and 820 g.
A laptop port can power it.
One system update exists, with no release notes.
It is the only version Roland offer.
Official equipment video
Note: This feature requires an internet connection.
Connections and setup
Audio outputs
Short answer. The TB-3 has OUT (L/MONO, R) on a pair of quarter-inch jacks and PHONES on a stereo quarter-inch jack.
TB-3 or TB-03. The TB-3 is 240 mm wide with a touch pad across the top and quarter-inch sockets on the back. The TB-03 is 308 mm, has a row of knobs and a display, and puts all its audio on one 3.5 mm socket with CV and GATE outputs beside it. If the audio socket is small, you are holding the other machine.
Cable. A booth lead, a DI or a stage box takes the quarter-inch output directly. Every Boutique on this hub needs a 3.5 mm to dual quarter-inch or 3.5 mm to RCA adaptor that a venue will not have in a drawer.
Output level. N/A. Set it against the booth at soundcheck, and check it again after a patch change: an acid line with the resonance up moves a long way between sounds, and the loudest patch is the one that matters.
No audio input. There is no audio input and no mix-in, so it cannot pass another source through, which the SH-4d and the Boutiques can via their MIX IN.
Clock and MIDI
Short answer. The TB-3 has MIDI IN and MIDI OUT on five-pin DIN, plus MIDI over the USB port.
Both directions, on the ordinary cable. The lead is the five-pin DIN that everything else uses. The SP-404MKII moved its MIDI to 3.5 mm jacks needing Roland's own adaptor cables; this machine did not, and that is one less thing to buy.
MX-1 over USB. Four machines work with the USB HOST ports of the MX-1, and its specification names the TB-3 among them. One cable carries this machine's audio into the mixer and its MIDI at the same time.
No CV and no GATE. The TB-03 has those; this does not. A modular rig drives this machine over MIDI or not at all.
What the computer needs
Short answer. The TB-3 has a USB type B port carrying audio and MIDI, and it needs Roland's own driver.
Drivers. The driver list is ten builds deep on a machine with one firmware version. Roland publish it to 1.0.5 for macOS Sonoma 14 or later and Sequoia 15, and 1.0.1 for Windows 10 and 11, with eight older builds behind those.
Seen but not heard. A unit the software sees but cannot hear is usually the driver. That is the first thing to check on a machine that has been in a cupboard, before the firmware or the cable.
Connector. USB type B is the older square connector. A recent laptop with only Type-C needs an adaptor or a B-to-C cable.
Power and weight
Short answer. The TB-3 runs on an AC adaptor, or USB bus power at 500 mA.
USB power. 500 mA is undemanding. A laptop port or any USB battery pack runs it, so this machine works on a table with no mains socket, which is a genuine difference from the MC-707 and the MX-1.
Weight. 820 g across 240 by 173 mm. Lighter than the Boutique synthesizers, which run 940 g to 995 g with their cells in, and well under half the SH-4d.
Discontinued. Roland still host the manual, the system update and the drivers, so a second-hand unit is supported on paper. There will be no further firmware.
What to watch for
Firmware
Short answer. The TB-3 has one system update, version 1.1. Release notes: N/A.
Roland's page. The download, and a TB-3 Update Procedure PDF. There is no update-history section, no symptom named, no date given, so there is no way to say what 1.1 changed.
Do this. Update it: 1.1 is the only version Roland offer, even though they do not say what it changed.
Known issues. No defect has ever been published for this machine either. With no change history at all, that is a statement about Roland's documentation rather than about the hardware. It is not a clean record.
Professional tips
Before the gig
Say which machine you are bringing when somebody asks for "a TB". If the other person is thinking of the Boutique, they will plan for a 3.5 mm adaptor you do not need and no quarter-inch channel you do.
Carry a USB battery pack rather than the adaptor. The reasoning is under Power and weight.
Pair it with the MX-1 over USB if you have one. Clock and MIDI describes what the host ports carry.
Firmware, drivers and manuals
Official downloads and documents
Go to Roland for the files themselves. We link their pages instead of hosting a copy, because a manual copied here is a snapshot of release day and theirs is the one that stays current.
The version of record is 1.1. The download page carries the system update, an update-procedure PDF and the drivers.
Firmware downloads. Official Roland firmware page →
Manuals. Official Roland manual page →
Broken link? Let us know and we'll fix it.
Frequently asked questions
Quick answers
- Is the TB-3 the same as the TB-03?
- No. They differ in size, audio socket and outputs.
- What cable do I need for the house system?
- An ordinary quarter-inch lead.
- Does it have CV and GATE?
- No. It talks to other gear over MIDI only.
- Can I run it from a USB port?
- Yes, or from the AC adaptor.
- What firmware should it be on?
- 1.1.
- Are there any known faults?
- None known.
- What output level does it run at?
- N/A. Use the loudest patch you plan to play.
- Can I plug another instrument into it?
- No. There is no audio input on this machine.
- Does it need a driver?
- Yes, Roland's own, with builds for current macOS and Windows.
- How heavy is it?
- 820 g.
Related synthesizers
Commonly paired with
What you usually find beside it in working booths, from club, festival and rental installs rather than from a manufacturer document.
Playing soon and it is not working?
Start Emergency ModeKeep the Emergency Card
We will email you the printable PDF so it is on your phone before the next dark booth. Occasional notes that save gigs. No spam, unsubscribe in one click.
Register and receive itRegistering is free and counts everywhere on Save My Gig. We send a confirmation email first. Your address is stored with Brevo, our email provider. Unsubscribe any time. Privacy
Sources: Roland's own TB-3 product and specification pages, the owner's manual and its Updates & Drivers page, checked 17 October 2026. Specifications theirs, priorities ours.